Holley-hosted Davis EFI-TC2 manual, printed page 13, illustrates these lead functions for an HP or Dominator installation. The drawing does not number controller connector cavities; these are wire identifications, not a numbered pinout. Confirm the correct harness and ECU configuration from the original EFI-TC2 manual.
| Lead colour | Function in the illustrated Holley installation |
|---|---|
| Red | Battery positive through optional TC power switch |
| Black | Battery negative / ground |
| White | Driveshaft RPM sensor |
| Yellow | Correction output to ECU |
| Orange | Driveshaft speed output to ECU |
| Blue | 5–20 V positive supply for optional output |
| Pink | Optional LED or data output |
The diagram separately shows an optional TC enable switch connected at the ECU; it is not labelled as a numbered EFI-TC2 terminal. Follow the manufacturer-specific ECU setup and sensor instructions.