Tuning Wiki

Which engines

Dacia uses small turbocharged petrol engines in the Sandero, Stepway and Duster: a 0.9 TCe, a 1.0 TCe and, on the 2018 to 2020 Duster, a 1.3 TCe. The 1.3 is the same engine family as the Renault unit discussed on Renault TCe petrol engines. Dacia generally shares Renault Group electronics; see Dacia diagnostic systems.

Controllers named by tuners

CarController named
Duster 1.0 TCe 90 hpContinental EMS3141 / EMS3140
Duster 1.3 TCe 130 hp (2018 to 2020)Continental EMS3160
Sandero 0.9 TCe 90 hp (2013 to 2015)Valeo V50

One shop does not state the ECU at all and says it will be confirmed after reading, with OBD, bench or boot access depending on the version. Treat the ECU label as authoritative.

Quoted stage 1 gains

CarClaim
Sandero 1.0 TCe 100 hp (2016 to 2020)100 to 125 bhp and 160 to 200 Nm (+25 bhp, +40 Nm)
Sandero 0.9 TCe 90 hp (2016 to 2020)90 to about 107 bhp (+17 bhp)
Duster 1.0 TCe 90 hp110 hp and 200 Nm from 90 hp and 160 Nm
Duster 1.3 TCe 130 hp175 hp and 310 Nm at one vendor; 165 hp and 300 Nm at another, from 130 hp and 240 Nm

These are database examples and sales claims. The two Duster 1.3 figures differ by 10 hp, and one shop explicitly says results vary with condition, ECU version, fuel and supporting hardware. Some options listed alongside them are labelled for off-road or competition use only.

What is not known

There are no independent dyno results, no information on how the remap manages boost and turbo protection on these small engines, and no evidence on the long-term effect on the timing chain or oil consumption concerns recorded on the related Renault TCe engines. Check the chain and oil-consumption history of the specific car before changing the calibration.

Sources