Tuning Wiki
Browse BMW Jeep

This is a 1988 Jeep Comanche pickup rebuilt with a BMW M57N diesel engine driving the Jeep AW4 automatic transmission through an adaptor. The engine was collected in March 2024, trial-fitted and then installed with fabrication and wiring work.

BMW M57 held on lifting straps during trial fit in the Jeep Comanche engine bay

The M57 during trial fitting in March 2024. Photograph by colthrax, reproduced with permission.

Engine and transmission

An adaptor joins the M57 to the Jeep AW4 gearbox. The owner describes a sequential shift arrangement using an Arduino and NiftyShifter, built while working out the throttle signal needed by the automatic transmission controller. Cooling combines the M57 mechanical fan with a Jeep 2.5 diesel radiator and fan shroud.

BMW M57 installed beneath the bonnet of the red Jeep Comanche

The later installation, shared in the Comanche Club owner profile. Photograph by colthrax, reproduced with permission.

Browse more M57 4×4 builds and the BMW M57 engine guide.

Sources