Forklift trucks commonly use CAN for communication between electronic controllers, but there is no single forklift-wide CAN application protocol. One documented example is the Sevcon Gen4 controller family, intended for counterbalanced, warehouse and pedestrian lift trucks. Its application manual shows CANopen communication between traction and pump controllers, and lists CANopen profiles DS301, DS401 and DSP402 over an ISO 11898-2 physical layer.
The Gen4 manual lists supported rates from 20 kbit/s through 1 Mbit/s, with 1 Mbit/s as the default. That is a product capability, not a rate to assume for every truck. Node IDs, object dictionaries, configuration and service access are implementation-specific. Treat service data and configuration as controller-specific; do not assume an OBD-style diagnostic connector or universal CAN IDs.
Sources
- Sevcon Gen4 Applications Reference Manual, document 177/52701. Forklift application list, controller network example and CAN interface capabilities.
- CAN in Automation: standardized higher-layer protocols. CANopen and J1939 family context.