Tuning Wiki
Browse BMW
Applies to

Check the hardware and software limits stated in this article.

Aliant Auto documents the air-mass logic on a 286 PS BMW E90 335d with Bosch EDC16CP35. The Powergate3 vehicle list pairs the 2006 210 kW E90 335d with M57D30T2 and this ECU. For another M57, establish the ECU identity and software version before applying the signal names below. Aliant Auto’s 335d calibration case · Powergate3 vehicle list, BMW E90 335d 6AT.

Which air-mass value is in the log?

Aliant describes three signal-quality states for this application.

  • QualityOk. The ECU accepts the measured mass airflow (MAF) signal.
  • QualityModel. When the MAF signal is faulty or reaches its usable limit, the ECU can use the ASMod estimate while manifold pressure and intake temperature remain available.
  • QualityDefault. If the MAF signal and a required model input are unavailable, AFSCD_dmAirSubsVal_MAP supplies a substitute value indexed by engine speed and injected quantity.

To interpret a plausible airflow reading during a MAF fault, identify whether the logged channel is the meter signal or the selected value. Where available, log both alongside the quality state, manifold absolute pressure and intake air temperature. The quality state distinguishes a model estimate from the default lookup. Signal selection in the Aliant Auto case study.

What the particulate-filter switch selects

In the documented software, ASMod continues calculating while the meter is healthy. PFlt_swtASModOn_C selects the airflow source used by particulate-filter calculations. Its setting alone cannot tell you which value another ECU function uses. Aliant Auto’s explanation of the PFlt selector.

Bosch ASMod air system model · Bosch EDC16CP35 · BMW M57 engines.