BMW's late-1990s and early-2000s powertrain architecture (E46, E39, E38, E53 X5, E83 X3, E85 Z4) uses the CAN11h 11-bit protocol running at 500 kbit/s on the twisted powertrain CAN pair. Engine ECUs documented on this bus include Siemens MS42, Siemens MS43, Siemens MS45 (in CAN11h mode), MSS52, and MSS54/MSS54HP.
CAN11h Message Map (500 kbit/s)
Every frame uses an 11-bit standard identifier and an 8-byte payload unless noted otherwise.
| Hex ID | Decimal | Name | Transmitter | Cycle | Description & ECU Usage |
|---|---|---|---|---|---|
0x153 | 339 | ASC1 | ASC / DSC | 10 ms | Traction control torque intervention (ASR/MSR), wheel/vehicle speed flags; read by MS42/MS43/MS45 |
0x1F0 | 496 | ASC2 | ASC / DSC | — | Individual wheel speeds (present on bus, not read by MS42/MS43/MS45) |
0x1F3 | 499 | ASC3 | ASC / DSC | — | Traction control status; read by MS42/MS43/MS45 |
0x1F5 | 501 | LWS1 | Steering Angle Sensor | — | Steering angle; read by MS43 and MS45 (when DSC fitted) |
0x1F8 | 504 | ASC4 | ASC / DSC | — | Lateral acceleration / yaw data; read by MS45 |
0x316 | 790 | DME1 | DME (ECU) | 10 ms | Ignition state, engine RPM, indicated/requested torque, torque loss, MAF torque, AMT error flags |
0x329 | 809 | DME2 | DME (ECU) | 10 ms | Multiplexed CAN level / torque norm, coolant temp, ambient pressure, clutch/brake/cruise switches, pedal position |
0x338 | 824 | DME3 | DME (ECU) | 1000 ms / change | Sport button status (MS43 Alpina Roadster & MS45; not transmitted by stock MS42) |
0x33C | 828 | GCU1 (Custom) | MS43 Patch | — | Community MS43 patch output: secondary MAF, DMTL, injection time, IAT, ignition angle |
0x43D | 1085 | AMT1 | SMG / AMT | — | Automated manual transmission message; read by MS43/MS45 |
0x43F | 1087 | EGS1 | EGS (Auto TCU) | — | Automatic gearbox torque/shift request; read by MS42/MS43/MS45 |
0x443 | 1091 | EGS2 | EGS (Auto TCU) | — | Secondary automatic transmission message; read by MS45 |
0x445 | 1093 | TXU1 | Transfer Case | — | All-wheel-drive transfer case unit (Xi/X3/X5 models) |
0x545 | 1349 | DME4 | DME (ECU) | 10 ms | MIL/EML/cruise lamps, fuel consumption integrator, oil temp, M-cluster warm-up LEDs, oil level (MSS54HP) |
0x610 | 1552 | ICL1 | Instrument Cluster (IKE) | — | Instrument cluster status (present on bus) |
0x613 | 1555 | ICL2 | Instrument Cluster (IKE) | — | Odometer / fuel level / cluster status; read by MS42/MS43/MS45 |
0x615 | 1557 | ICL3 | Instrument Cluster (IKE) | — | Ambient temperature, AC / cluster requests; read by MS42/MS43/MS45 |
DME1 (0x316 / 790) — 10 ms
| Byte(s) | Signal | Encoding / Bits | Formula & Unit |
|---|---|---|---|
| 0 | Status Bitfield | Bit 0: LV_SWI_IGK (Terminal 15 on)Bit 1: LV_F_N_ENG (Crank sensor fault)Bit 2: LV_ACK_TCS (ASC1 valid)Bit 3: LV_ERR_GC (Gear change possible)Bits 4–5: SF_TQD (Charge intervention state)Bit 7: LV_F_SUB_TQI (MAF fault) | Bit flags |
| 1 | TQI_TQR_CAN | Unsigned 8-bit | Indexed engine torque (% of C_TQ_STND): raw × 0.390625 % |
| 2–3 | N_ENG | Unsigned 16-bit Intel (LE): Byte 2 LSB, Byte 3 MSB | Engine speed: ((B3 × 256) + B2) × 0.15625 rpm |
| 4 | TQI_CAN | Unsigned 8-bit | Indicated engine torque: raw × 0.390625 % |
| 5 | TQ_LOSS_CAN | Unsigned 8-bit | Engine torque loss (friction, AC, alternator): raw × 0.390625 % |
| 6 | ERR_AMT_CAN | Bits 6–7 | AMT error state |
| 7 | TQI_MAF_CAN | Unsigned 8-bit | Theoretical MAF/IGA torque: raw × 0.390625 % |
DME2 (0x329 / 809) — 10 ms
| Byte(s) | Signal | Encoding / Bits | Formula & Unit |
|---|---|---|---|
| 0 | MUX_INFO / MUX_CODE | Bits 0–5: MUX_INFO; Bits 6–7: MUX_CODE (0 = CAN_LEVEL 0x11 on MS43, 2 = OBD_STEUER, 3 = MD_NORM torque norm) | MD_NORM: 16 Nm/bit (0–1008 Nm) |
| 1 | TEMP_ENG | Unsigned 8-bit (init 0xFF) | Coolant temperature: raw × 0.75 − 48 °C |
| 2 | AMP_CAN | Unsigned 8-bit (0xFF = error) | Ambient pressure: raw × 2 + 598 hPa |
| 3 | Switches & Cruise | Bit 0: Clutch depressed (LV_SWI_CLU)Bit 1: Idle regulator state Bit 2: ACC1 ACK Bit 3: Engine running ( LV_ERU_CAN)Bits 5–7: STATE_MSW_CAN (cruise buttons) | Bit flags / enum |
| 4 | TPS_VIRT_CRU_CAN | Unsigned 8-bit | Virtual throttle position: raw × 0.390625 % |
| 5 | TPS_CAN | Unsigned 8-bit (0xFF = PVS error) | Accelerator pedal position: raw × 0.390625 % |
| 6 | Brake / Kickdown / Cruise | Bit 0: Brake switch (LV_BS)Bit 1: Brake fault ( LV_ERR_BS)Bit 2: Kickdown ( LV_KD_CAN)Bits 3–5: STATE_CRU_CANBits 6–7: REQ_SHIFTLOCK | Bit flags / enum |
DME3 (0x338 / 824) and DME4 (0x545 / 1349)
| CAN ID | Byte(s) | Signal | Formula & Notes |
|---|---|---|---|
0x338 (824) | 2 | STATE_SOF_CAN | Sport button status (MS43 Alpina Roadster & MS45): 0 = On (SMG), 1 = Off, 2 = On, 3 = Error |
0x545 (1349) | 0 | Warning & Cruise Lamps | Bit 1: Check Engine Light (LV_MIL); Bit 3: Cruise main lamp; Bit 4: EML light; Bit 6: Fuel cap light |
0x545 (1349) | 1–2 | FCO | Fuel consumption rolling counter (Byte 1 LSB, Byte 2 MSB) |
0x545 (1349) | 3 | Oil & Cluster LEDs | Bits 0–2: Oil level LEDs; Bit 3: Coolant overheat light; Bits 4–6: M-cluster warm-up LEDs; Bit 7: Upshift indicator |
0x545 (1349) | 4 | TOIL_CAN | Engine oil temperature: raw − 48 °C (max 0xFE = 206 °C) |
0x545 (1349) | 6 | Oil Level (MSS54HP only) | (raw − 158) / 10 L (0x80/0xC0 = −3.0 L to 0xBE/0xFE = +3.2 L) |
0x545 (1349) | 7 | Status Flags | Bit 0: Tire pressure state (MSS54); Bit 7: Low oil pressure warning |
Sources
- Siemens MS43 CAN Bus — MS4X Wiki. Accessed 2026-11-17.
- Siemens MS42 CAN Bus — MS4X Wiki. Accessed 2026-11-17.
- Siemens MS45 CAN Bus (CAN11h) — MS4X Wiki. Accessed 2026-11-17.
- Siemens MS43 Custom CAN Messages — MS4X Wiki. Accessed 2026-11-17.