Tuning Wiki
Browse Abarth Fiat

Gloria is a 2017 Abarth 595 modified in July 2026 with a Forge induction kit, a carbon engine cover, BC coilovers and 16 × 7-inch Braid Fullrace A wheels fitted with 225/45 R16 Yokohama AD08RS tyres. The owner reports that 3 mm spacers on the front wheels are sufficient for tyre clearance.

Engine

The car has a Forge induction kit and a carbon engine cover.

Suspension, wheels and tyres

The car runs BC coilovers and 16 × 7-inch Braid Fullrace A wheels with 225/45 R16 Yokohama AD08RS tyres.

Front tyre clearance

The wide front tyres needed clearance. The initial fit used 13 mm spacers that the owner had to hand. The revised fit, pictured below, uses a 3 mm spacer on each front wheel, which the owner reports is sufficient for this setup.

Gloria’s front wheel and arch with the revised spacerFront view showing the tyre position against the arch

Photos from blu73 on The FIAT Forum, reproduced with permission.

Sources