Motorsport and standalone engine management systems broadcast real-time telemetry over CAN for digital dashes, data loggers, power distribution modules (PDMs), and aftermarket transmission controllers. Unlike OEM buses, most standalone ECUs allow configurable bit rates and base IDs, though each maker defines a standard default stream.
Aftermarket ECU Default CAN Streams Overview
| ECU / Protocol | ID Width | Default Bit Rate | Default Base CAN ID(s) | Byte Order |
|---|---|---|---|---|
| Haltech CAN Broadcast V2 (Elite / Nexus) | 11-bit | 1 Mbit/s | 0x360–0x375, 0x3E0–0x3E4 | Motorola (Big-Endian) |
| MaxxECU Default CAN v1.2 / v1.3 | 11-bit | 500 kbit/s | 0x520–0x542 | Intel (Little-Endian) |
| ECUMaster EMU Black / EMU PRO Stream | 11-bit | 1 Mbit/s (or 500 kbit/s) | 0x600–0x60F (configurable base) | Intel (Little-Endian) |
| AEMnet v150609 (Infinity / Series 2) | 29-bit | 500 kbit/s | 0x01F0A000 base | Motorola (Big-Endian) |
| Link / Vi-PEC Generic Dash & Dash 2 | 11-bit | Configurable (500 kbit/s or 1 Mbit/s) | 0x3E8 (decimal 1000, configurable) | Generic Dash: Intel (LE); Dash 2: Motorola (BE) |
| Link CAN-Lambda (Wideband) | 11-bit | 1 Mbit/s | 0x3B6–0x3BD (TX), 0x3BE (RX) | Motorola (Big-Endian) |
| MegaSquirt CAN Dash / Realtime | 11-bit | 500 kbit/s | Dash: 0x5E8 (1512); Realtime: 0x5F0 (1520) | Motorola (Big-Endian) |
| MoTeC M1 GPx 1.4 PDM Output | 11-bit | Configurable (typically 1 Mbit/s) | 0x118, 0x119 | Protocol-defined |
Haltech CAN Broadcast V2 (1 Mbit/s, 11-bit, Big-Endian)
Used by Haltech Elite, Nexus, and Sport series ECUs. Temperatures are transmitted in deciKelvin (K = raw / 10, so °C = raw / 10 − 273.15); gauge pressures subtract 101.3 kPa.
| Hex ID | Decimal | Rate | Bytes | Channel | Sign & Scaling | Unit |
|---|---|---|---|---|---|---|
0x360 | 864 | 50 Hz | 0–1 | RPM | Unsigned raw | rpm |
0x360 | 864 | 50 Hz | 2–3 | Manifold Pressure (MAP) | Unsigned raw / 10 | kPa (abs) |
0x360 | 864 | 50 Hz | 4–5 | Throttle Position (TPS) | Unsigned raw / 10 | % |
0x360 | 864 | 50 Hz | 6–7 | Coolant Pressure | Unsigned raw / 10 − 101.3 | kPa (gauge) |
0x361 | 865 | 50 Hz | 0–1 | Fuel Pressure | Unsigned raw / 10 − 101.3 | kPa (gauge) |
0x361 | 865 | 50 Hz | 2–3 | Oil Pressure | Unsigned raw / 10 − 101.3 | kPa (gauge) |
0x361 | 865 | 50 Hz | 4–5 | Engine Demand | Unsigned raw / 10 | % |
0x361 | 865 | 50 Hz | 6–7 | Wastegate Pressure | Unsigned raw / 10 − 101.3 | kPa (gauge) |
0x362 | 866 | 50 Hz | 0–1 / 2–3 | Injection Stage 1 / Stage 2 Duty Cycle | Unsigned raw / 10 | % |
0x362 | 866 | 50 Hz | 4–5 | Ignition Angle (Leading) | Signed raw / 10 | ° |
0x364 | 868 | 50 Hz | 0–7 | Injection Stage 1–4 Avg Injection Time (2B each) | Unsigned raw / 1000 | ms |
0x368 | 872 | 20 Hz | 0–7 | Wideband Lambda 1–4 (2B each) | Unsigned raw / 1000 | λ |
0x36B | 875 | 20 Hz | 4–5 / 6–7 | Turbo Speed 1 (raw × 10 rpm) / Lateral G (raw / 10) | Unsigned / Signed | rpm / m/s² |
0x36E | 878 | 20 Hz | 0–1 / 6–7 | Engine Limiting Active (0/1) / Longitudinal G | Unsigned / Signed | bool / m/s² |
0x370 | 880 | 20 Hz | 0–1 / 4–7 | Vehicle Speed (raw / 10) / Intake Cam Angle 1 & 2 | Unsigned / Signed | km/h / ° |
0x372 | 882 | 10 Hz | 0–1 / 4–7 | Battery Voltage (raw / 10) / Target Boost / Baro | Unsigned raw / 10 | V / kPa |
0x373–0x375 | 883–885 | 10 Hz | 0–7 | EGT Sensors 1–12 (4 sensors per frame) | Unsigned raw / 10 | K |
0x3E0 | 992 | 5 Hz | 0–1 / 2–3 / 4–5 / 6–7 | Coolant / Air / Fuel / Oil Temperature | Unsigned raw / 10 | K |
MaxxECU Default CAN v1.2 / v1.3 (500 kbit/s, 11-bit, Little-Endian)
MaxxECU's default output uses four 16-bit signed integers per 8-byte frame. Collision warning: MaxxECU warns that default v1.3 frame 0x540 collides with VAG DSG gearboxes; use v1.2 on VAG DSG installations.
| Hex ID | Decimal | Rate | Version | Bytes 0–1 | Bytes 2–3 | Bytes 4–5 | Bytes 6–7 |
|---|---|---|---|---|---|---|---|
0x520 | 1312 | 50 Hz | 1.2+ | RPM (1 rpm) | TPS / Pedal (0.1 %) | MAP (0.1 kPa) | Avg Lambda (0.001 λ) |
0x521 | 1313 | 50 Hz | 1.2+ | Lambda Bank A (0.001) | Lambda Bank B (0.001) | Ignition Angle (0.1 °) | Ignition Cut (%) |
0x522 | 1314 | 50 Hz | 1.2+ | Primary Fuel PW | Primary Fuel Duty | Fuel Cut (%) | Reserved |
0x523 | 1315 | 50 Hz | 1.2+ | Undriven Wheel Speed | Driven Wheel Speed | Slip / Diff | Reserved |
0x526 | 1318 | 50 Hz | 1.3+ | Status bitfield (shiftcut, rev-limit, anti-lag, traction limiter, AC, knock, brake, clutch, nitrous) | |||
0x527 | 1319 | 50 Hz | 1.3+ | Acc X | Acc Y | Acc Up (0.01 G) | Lambda Target (0.001 λ) |
0x528 | 1320 | 50 Hz | 1.3+ | Knock Level Peak (1) | Knock Corr (0.1 °) | Knock Count | Last Knock Cyl |
0x531 | 1329 | 10 Hz | 1.2+ | Total Fuel Trim | Ethanol % (0.1 %) | Total Ign Comp (0.1 °) | EGT 1 |
0x536 | 1334 | 10 Hz | 1.2+ | Gear | Boost Solenoid Duty | v1.3 additions | v1.3 additions |
0x537 | 1335 | 10 Hz | 1.3+ | Fuel Pressure 1 | Wastegate Pressure | Oil Pressure / Temp | Extended |
0x540 | 1344 | 10 Hz | 1.3+ | Active boost table, active tune selector, virtual fuel tank (collides with VAG DSG 0x540) | |||
ECUMaster EMU Black / EMU PRO Stream (Base 0x600, 11-bit, Little-Endian)
Default bitrate on EMU Black is 1 Mbit/s (EMU PRO CAN1 is 1 Mbit/s, CAN2 configurable; 500 kbit/s is also widely used when bridging OEM buses). Base ID defaults to 0x600 (decimal 1536).
| Hex ID | Decimal | Offset | Channel & Scaling |
|---|---|---|---|
0x600 | 1536 | Base + 0 | Bytes 0–1: RPM (u16, 1 rpm); Byte 2: TPS (u8, 0.5 %); Byte 3: IAT (s8, 1 °C); Bytes 4–5: MAP (u16, 1 kPa); Bytes 6–7: Injector PW (u16, 1/62 ms) |
0x601 | 1537 | Base + 1 | Bytes 0–7: Analog Inputs AIN #1–#4 (u16 each, 5/1024 V/bit) |
0x602 | 1538 | Base + 2 | Bytes 0–1: Vehicle Speed (u16, 1 km/h); Byte 2: Baro (u8, 1 kPa); Byte 3: Oil Temp (u8, 1 °C); Byte 4: Oil Pressure (u8, 0.0625 bar); Byte 5: Fuel Pressure (u8, 0.0625 bar); Bytes 6–7: Coolant Temp (s16, 1 °C) |
0x603 | 1539 | Base + 3 | Byte 0: Ignition Angle (s8, 0.5 °); Byte 1: Dwell Time (u8, 0.05 ms); Byte 2: Wideband Lambda (u8, 1/128 λ); Bytes 3–7: AFR/Lambda & correction data |
0x604–0x607 | 1540–1543 | Base + 4..7 | Gear, battery voltage, boost/outputs, knock/VVT, EGTs, DBW (see EMU Black / EMU PRO manual for exact firmware layout) |
Link / Vi-PEC Generic Dash (Compound on 0x3E8) & CAN-Lambda
Link's Generic Dash stream sends 14 compound frames on a single configured 11-bit ID (default 0x3E8 / 1000). Byte 0 is the 0-based frame index (0–12 for frames 1–13), Byte 1 is 0x00, and Bytes 2–3, 4–5, and 6–7 carry three 16-bit unsigned little-endian channels.
| Frame Index (Byte 0) | Bytes 2–3 | Bytes 4–5 | Bytes 6–7 |
|---|---|---|---|
0 (Frame 1) | Engine Speed (raw rpm) | MAP (raw kPa) | MGP (raw − 100 kPa) |
1 (Frame 2) | Barometric Pressure (raw × 0.1 kPa) | TPS (raw × 0.1 %) | Injector DC Primary (raw × 0.1 %) |
2 (Frame 3) | Injector DC Secondary (raw × 0.1 %) | Injector Pulse Width (raw × 0.001 ms) | ECT (raw − 50 °C) |
3 (Frame 4) | IAT / Battery Voltage (per Link PCLink order) | MAF (g/s) / Lambda / Speed | Limits flags / Status |
4 (Frame 5) | Gear Position | Injector Timing (°BTDC) | Ignition Timing (°BTDC) |
5 (Frame 6) | Cam Inlet Position L (°) | Cam Inlet Position R (°) | Cam Exhaust Position L (°) |
6 (Frame 7) | Cam Exhaust Position R (°) | Lambda 1 (λ) | Lambda 2 (λ) |
7 (Frame 8) | Trig 1 Error Counter | Fault Codes | Fuel Pressure (kPa) |
8 (Frame 9) | Oil Pressure (kPa) | — | LF Wheel Speed (km/h) |
9 (Frame 10) | LR Wheel Speed (km/h) | RF Wheel Speed (km/h) | RR Wheel Speed (km/h) |
10–12 (Frames 11–13) | Knock Levels 1–8 across frames 11–13 (index 10: Knock 1–3; index 11: Knock 4–6; index 12: Knock 7–8) | ||
Link CAN-Lambda (1 Mbit/s, 11-bit): Modules transmit on 0x3B6–0x3BD (decimal 950–957, one per module ID 0–7) and receive commands/exhaust pressure on 0x3BE (958). IDs 0x64, 0x65, and 0x3BF–0x3C6 are reserved for Link CAN-Lambda programming.
AEMnet v150609 (29-Bit, 500 kbit/s) & AEM Wideband
AEM Infinity / Series 2 / EMS-4 ECUs transmit 29-bit extended frames starting at base ID 0x01F0A000 (decimal 32546816) at 500 kbit/s (Big-Endian).
| Hex ID (29-bit) | Decimal | Channels & Documented Scaling |
|---|---|---|
0x01F0A000 | 32546816 | Bytes 0–1: Engine RPM (raw × 0.39063 rpm); Bytes 4–5: TPS (raw × 0.0015259 %); Byte 6: IAT (s8, 1 °C); Byte 7: CLT (s8, 1 °C) |
0x01F0A003 | 32546819 | Lambda (λ), Vehicle Speed (km/h), Gear, Battery Voltage (V) |
0x01F0A004 | 32546820 | MAP / Boost, Byte 3 Fuel Pressure (raw × 0.580151 PSI), Byte 4 Oil Pressure (raw × 0.580151 PSI) |
0x01F0A007 | 32546823 | Barometric Pressure (kPa), Oil Temperature (°C) |
0x01F0A020 | 32546848 | Knock Retard (Cyl 1–8 average, °) |
0x00000026 | 38 | AEM 30-4900 Wideband Failsafe Gauge: Bytes 0–1 Lambda (×0.0001), Bytes 2–3 Pressure (×0.001 − 15 PSI), Bytes 4–5 RPM (×0.39063), Byte 6 status bits |
MegaSquirt CAN Dash (0x5E8) & Realtime Broadcast (0x5F0)
Supported on MS2/Extra 3.4.x and MS3 1.4.x+ at 500 kbit/s, 11-bit, Motorola (Big-Endian). Note that MegaSquirt broadcasts temperatures in °F × 10 (divide raw by 10 to get °F).
| Mode & Hex ID | Decimal | Bytes 0–1 | Bytes 2–3 | Bytes 4–5 | Bytes 6–7 |
|---|---|---|---|---|---|
Dash 0x5E8 | 1512 | MAP (s16 ÷ 10 kPa) | RPM (u16, 1 rpm) | CLT (s16 ÷ 10 °F) | TPS (s16 ÷ 10 %) |
Dash 0x5E9 | 1513 | PW1 (u16 ÷ 1000 ms) | PW2 (u16 ÷ 1000 ms) | MAT (s16 ÷ 10 °F) | Ign Advance (s16 ÷ 10 °BTDC) |
Dash 0x5EA | 1514 | B0: AFR target (÷10), B1: AFR1 (÷10) | EGOcor1 (s16 ÷ 10 %) | EGT1 (s16 ÷ 10 °F) | Seq PW1 (s16 ÷ 1000 ms) |
Dash 0x5EB | 1515 | Battery (s16 ÷ 10 V) | Sensors1 (s16 ÷ 10) | Sensors2 (s16 ÷ 10) | B6: Knock retard (÷10 °) |
Dash 0x5EC | 1516 | VSS1 (u16 ÷ 10 m/s) | TC retard (s16 ÷ 10 °) | Launch timing (s16 ÷ 10 °) | Unused |
Realtime 0x5F0 (Grp 0) | 1520 | Seconds (u16, s) | PW1 (u16 ÷ 1000 ms) | PW2 (u16 ÷ 1000 ms) | RPM (u16, 1 rpm) |
Realtime 0x5F1 (Grp 1) | 1521 | Ign Adv (s16 ÷ 10 °) | B2: squirt, B3: engine | B4/B5: afrtgt1/2 (÷10) | B6/B7: unused |
Realtime 0x5F2 (Grp 2) | 1522 | Baro (s16 ÷ 10 kPa) | MAP (s16 ÷ 10 kPa) | MAT (s16 ÷ 10 °F) | CLT (s16 ÷ 10 °F) |
Realtime 0x5F3 (Grp 3) | 1523 | TPS (s16 ÷ 10 %) | Battery (s16 ÷ 10 V) | AFR1 old (s16 ÷ 10) | AFR2 old (s16 ÷ 10) |
Sources
- Haltech CAN Protocol Specification and Haltech CAN Dash Protocol PDF. Accessed 2026-11-17.
- MaxxECU Default CAN Output Protocol (v1.2 / v1.3). Accessed 2026-11-17.
- ECUMaster EMU Black Manual (Section 6: CAN Stream). Accessed 2026-11-17.
- Link G4+ Device Specific CAN Information (Generic Dash & CAN-Lambda). Accessed 2026-11-17.
- Megasquirt CAN Broadcasting Format (MS2/Extra 3.4 & MS3 1.4). Accessed 2026-11-17.
- Autosport Labs — AEMnet 0x01F0A000 Decoding and KrispyGauge AEM Infinity Signals. Accessed 2026-11-17.
- ecu-to-mqtt ECU Protocols Reference. Accessed 2026-11-17.