Tuning Wiki

The 95160 and 95P08 are serial EEPROM designations used in documented engine ECU examples. The main 95160 array is 16 Kbit (2,048 bytes); 95P08 is 8 Kbit (1,024 bytes). The REVELPROG support manual lists 5P08, 5P08C3 and 95P08 together in its 8 Kbit SPI device group. Check the chip's exact manufacturer, marking and datasheet before selecting an algorithm or declaring parts interchangeable.

ECU examples

Controller as source describes itEEPROMEvidence
Bosch ME7.4.495160VVDI PROG manual lists 95160 with 29F400 for this ECU.
Bosch ME7.1.1, VAG95160ECUfile service list names 95160 for ME7.1.1 and 95040 for several other ME7 variants.
Bosch EDC15C395P08Renault ECU tool manual identifies 95P08, an AM29F400BT flash and C167 processor in its EDC15C3 application.

These are tool and service examples, not a fitment guarantee for every ECU bearing the same family name. Record the hardware number, board and complete chip marking. The external EEPROM and program flash are distinct regions.

Device-specific details

ST's M95160-A125/A145 datasheet describes a 2 KiB main SPI array, 32-byte pages and an additional lockable identification page. That specific modern automotive device has embedded ECC and should not be assumed to be the original part in an older ECU. Its identification page and protection state can be outside a normal main-array read.

The 95040 designation means 4 Kbit (512 bytes); one service listing describes it as 1 KB elsewhere on the same page. Use the actual chip datasheet rather than that inconsistent file-size claim. Repeated reads and correct device selection matter more than file size alone.