BMW transmission control module update.
The owner requested the latest BMW gearbox software. We used AutoHex, with ISTA/P, WinKFP and tuning-tool access available as alternatives if recovery was needed. Workshop equipment:
Read storyNews topic
22 stories filed under this topic.
The owner requested the latest BMW gearbox software. We used AutoHex, with ISTA/P, WinKFP and tuning-tool access available as alternatives if recovery was needed. Workshop equipment:
Read storyCustom Dyno Tune I don't think there are many if any BMW diesel we haven't tuned. Without a dyno how do you know what the real gains are? Some of the stuff we see applied to such diesels is often shocking. It clearly…
Read storyThe car visited for dyno measurement. A session with data logging can also help assess how an existing calibration behaves under load. Send the registration and details of any modifications when booking
Read storyPower increased from 322HP in stock form to 431HP after our custom Stage 1 tune. We also adjusted torque delivery and throttle response during the session
Read storyDid you know we're one of the few places in Wales that provides Walnut Blasting? I suspect we've been providing it longer than anyone else other than Sytner BMW in Wales too. Got a Misfire, Rough Idle or high misfire…
Read storyWe test calibrations using dyno runs and road logging. For vehicles too large for the rolling road, we use on-car logging and power measurement
Read storyMade a safe 327HP still running the DPF Stage 2 and Stage 3 options available Don't be fooled with Off the Shelf Maps pretending to be custom. If it isn't data logged, test driven and put on the dyno chances are its an…
Read storyDyno Developed and Dyno Tested No BS from a clueless salesman. But real tuning In Wales your choice is clear, an untested map, a generic map, a trip to England or a Dyno developed map from Llandow Tuning
Read storyThe calibration was data logged, dyno tested and checked on the road
Read storyWe removed carbon from the inlet valves. Deposits can affect airflow and running, but cleaning does not prevent them returning; we have seen accumulation again within a year. Breather-system condition should also be…
Read storyBoth calibrations were developed in-house, with the car tested on the dyno. Workshop equipment:
Read storyOn its earlier power run the car was down on power and had an unhealthy engine note. We raised those concerns; the engine later failed while the owner was driving it. It returned with a rebuilt engine, revised turbo…
Read story