Cowbridge coverage from Llandow
The service is delivered at the Llandow workshop in the Vale, not through a separate Cowbridge branch.
Workshop ECU calibration, diagnostics and dyno-supported tuning for Cowbridge drivers, all carried out at Llandow in the Vale.
Cowbridge drivers can book at our Llandow workshop in the Vale of Glamorgan. The vehicle can be assessed with diagnostics before any tuning recommendation, and on-site dyno support is available where appropriate. Confirm the exact vehicle and check current directions before travelling; this page does not represent a Cowbridge branch.
All bookings are completed at our Llandow workshop. Start with the exact car and the result you want, and we will explain the most suitable route before any work is agreed.
Check tuning options for your vehicleThe physical workshop is at Llandow rather than in Cowbridge town. Cowbridge drivers can send the exact vehicle details before travelling so we can discuss software support, existing faults and the intended result. The route depends on the starting point and current road conditions, so use the workshop address and live directions for the visit.
The service is delivered at the Llandow workshop in the Vale, not through a separate Cowbridge branch.
The tuning conversation stays with the workshop team, using the vehicle specification, condition and intended use to guide the work.
Diagnostics, logging and on-site dyno work can support the booking, but the appropriate checks depend on the individual vehicle.
These are common enquiry routes for local drivers. Every vehicle is assessed at our Llandow workshop before a diagnosis, repair or specialist service is recommended.
AdBlue warnings, no-start countdowns and SCR codes can start with a free code scan and printout before the appropriate diagnostic or repair route is agreed.
Explore the service Free initial code scan availableDPF restrictions, regeneration concerns and fault codes can be assessed before DPF cleaning, diagnostics or specialist DPF-delete work for suitable use cases.
Explore the service Free initial code scan availableEGR warning lights, flow codes, limp mode and poor running can be assessed before repair or any further specialist work is recommended.
Explore the service Free initial code scan availableBring in DPF warning lights, pressure faults or repeated regeneration concerns for a fault-code scan and clear next-step advice.
Explore the service Free initial code scan availableWe can assess SCR warnings, AdBlue countdowns and stored fault codes before deciding on the appropriate diagnostic or repair route.
Explore the service Free initial code scan availableUse the free initial code scan and printout to begin fault-finding for EGR, DPF or related engine-management warning lights.
Explore the serviceUse these guides to understand the options, then check the exact vehicle before choosing a stage or service.
See how vehicle-specific calibration is developed around diagnostics, data and the way you use the car.
Read the guide Llandow workshop guideUnderstand Stage 1 remapping and how we decide whether it suits a particular petrol or diesel vehicle.
Read the guide Llandow workshop guideTransmission software and shift-behaviour changes for supported vehicles and applications.
Read the guide Llandow workshop guideMeasured testing, fault investigation and development work for your car in our Llandow dyno cells.
Read the guide Llandow workshop guideStart with the warning lights, restriction fault or diagnostic results. We can discuss DPF cleaning, diagnostics and specialist DPF-delete enquiries for suitable use cases.
Read the guide Llandow workshop guideVisit Llandow for a free initial assessment, fault-code scan and printout, then decide whether advanced diagnostics or repair work is required.
Read the guideCustom remapping, developed in house and matched to your car. Choose a stage to compare suitability, gains and pricing.
For healthy standard cars
For suitable standard cars
For cars with supporting hardware
Log in to view starting prices. Final pricing depends on the selected vehicle and ECU.
The work is supported by real workshop capability, not a remote file-download service.
More than two decades of vehicle calibration, diagnostics and workshop experience.
Advice is based on the vehicle, its condition and the customer's goal, supported by our own calibration data.
We develop and test our own tuning work instead of reselling downloaded files.
On-site dyno cells, data logging and specialist diagnostic equipment support the work.
Find your make and model to see the available tuning data, or contact the workshop for a recommendation.
Practical information about the workshop, booking and what happens before tuning.
At the Llandow workshop in the Vale of Glamorgan. This page covers Cowbridge as a service area and does not claim a separate branch in the town.
Yes. ECU calibration is handled in-house at the workshop, with the exact vehicle and its condition considered before work is agreed.
Yes. Tell us about warning lights, stored faults or running concerns before booking because diagnostics may be the appropriate first step.
Use the Llandow workshop address and current directions from your starting point. Confirm the booking first rather than relying on a fixed route or travel-time estimate.
Tell us what you drive and what you want to improve. We will advise on the next useful step.