LTNexus Data Logging
ECU data logging, external measurement inputs and output to WinOLS. LTNexus is designed as a drop-in replacement for Vehical-Logger, bringing DID/PID and A2L RAM logging into one system.
Flat-rate fee. No per-car RAM logging fees.
LTNexus will be available for a flat-rate fee, with no per-car fees for advanced RAM logging. Work across vehicles and ECU software variants without a separate advanced RAM logging charge for each car.
ECU logging and diagnostics
- DID/PID ECU data logging
- Log ECU data through diagnostic data identifiers (DIDs) and parameter IDs (PIDs).
- DID scanning
- Scan DIDs to discover the data available from an ECU.
- RAM logging using A2L
- Use A2L definitions to log measurements directly from ECU RAM.
- Automatic RAM address discovery
- Discover A2L RAM addresses automatically across different ECU software variants.
- DTC reading and clearing
- Read and clear diagnostic trouble codes as part of your logging and diagnostic workflow.
PassThru devices and integrated multiplexing
LTNexus supports any PassThru device and includes integrated hardware and software multiplexing.
Read CAN bus signals directly
A range of CAN bus interfaces is supported for dedicated bus sniffing. Signals such as RPM can be read directly from CAN bus traffic, reducing the number of channels used by the DID or RAM loggers and leaving more of those channels available for other ECU measurements.
Additional measurement inputs
An open-source API enables input from additional sources, extending logging beyond the ECU. Supported sources include:
- Innovate Motorsport API
- Bring in readings from lambda sensors and other Innovate Motorsport measurement equipment.
- Dedicated CAN bus sniffing
- Capture signals directly from the vehicle's CAN bus through supported interfaces.
- Bosch emission testers
- Include measurements from Bosch emission testing equipment.
- RPM pickup devices
- Use an external RPM pickup as an additional engine-speed input.
Output to WinOLS
LTNexus supports output to WinOLS via the WinOLS visualiser, bringing logged data into your calibration workflow.
Currently in beta testing
LTNexus is currently in the beta test stage. Its logging features, hardware integration and software-variant support are being tested and refined ahead of release.