Tuning Articles
Technical articles, tuning advice, diagnostic notes and workshop knowledge from Llandow Tuning.
We have added Remap via OBD the Bosch ME17.3.0 ECU installed in Abarth, Fiat, and Alfa Romeo vehicles. to the list of current KESS3 updates we check when customers contact Llandow...
Read more
The latest KESS3 technical release from Alientech gives workshops another route to consider for Work in BENCH mode on the Denso 39110-05205 ECU, installed on the Hyundai EON MY2015...
Read more
This Alientech KESS3 news is relevant for anyone dealing with Reprogram Kamaz Trucks with Cummins CM2350A ECU via OBD.. It points to fresh support around CM2350A, ECU, OBD, which c...
Read more
This Alientech KESS3 news is relevant for anyone dealing with Work in BOOT mode on Delphi DCM7.1B ECUs which are installed on Peugeot Boxer and Citroen Jumper MY2019 vehicles.. It...
Read more
This Alientech KESS3 news is relevant for anyone dealing with Remap the latest generation of Vespa scooters (and more) equipped with the IAW MIU4 XC2765 ECU.. It points to fresh su...
Read more
Workshop update: Reprogram the Bobcat Track Loader with Delphi DCM3.7AP SH72546 ECU using BOOT mode.
The latest KESS3 technical release from Alientech gives workshops another route to consider for Reprogram the Bobcat Track Loader with Delphi DCM3.7AP SH72546 ECU using BOOT mode.....
Read more
We have added Read and write via OBD the Denso 39199-4ADN0 ECUs installed on Hyundai vans and the Denso 275722-4810 4N14 ECUs on Mitsubishi L200. to the list of current KESS3 updat...
Read more
Reprogram, even with open control unit, the Delphi DCM3.3 ECUs that equip JCB brand off-highway vehicles. is more than another supplier changelog item. For Llandow Tuning at www.tu...
Read more
This Alientech KESS3 news is relevant for anyone dealing with TCU Bosch DQ200 Gen II: reprogram the gearbox of many VAG group vehicles via OBD.. It points to fresh support around D...
Read more
This Alientech KESS3 news is relevant for anyone dealing with Works at 360° on the Continental SID807 control unit that is equipped on some Ford models with 1.6 TDCi engines.. It p...
Read more
The latest KESS3 technical release from Alientech gives workshops another route to consider for Read and write via OBD the Delphi DCM3.3 and Cummins CM2350A ECUs that equip JCB and...
Read more
A new Alientech KESS3 update has put Kawasaki Z900 (MY 18-19) and Z1000 (MY 14-16) remaps using the new BENCH and BOOT protocols by KESS3. on our workshop radar. The practical ques...
Read more