Topic
12 editorial items filed under this topic.
For owners and trade customers asking about Isuzu, the latest Alientech KESS3 update is worth noting. It expands support around New OBD and BENCH protocols for Delphi 4J ECUs: Isuz...
Read updateWe have added New BENCH protocol for Transtron ECUs – Isuzu. to the list of current KESS3 updates we check when customers contact Llandow Tuning. It is relevant to Bench, Boot, DCU...
Read updateFor owners and trade customers asking about Isuzu, the latest Alientech KESS3 update is worth noting. It expands support around New OBD and BENCH protocols for Transtron 6XK1 and 4...
Read updateThis Alientech KESS3 news is relevant for anyone dealing with New BENCH protocol for Isuzu L35 3.0TD – Bosch EDC17CV41.. It points to fresh support around Bench, EDC17, EDC17CV41,...
Read updateThe latest KESS3 technical release from Alientech gives workshops another route to consider for New Upgrade Pack for KESS3 and Powergate: reprogram Transtron Aurix ECUs!. At Llando...
Read updateA new Alientech KESS3 update has put Reprogram the latest generation Isuzu N-Series truck with Denso 276700-2051 ECU. on our workshop radar. The practical question for customers is...
Read updateWork on bench on dozens of new supported vehicles with Bosch ECUs, including MG1UA008 (JAC), MD1CS018 (Isuzu), and MEG17.9.77 (Perodua). is more than another supplier changelog ite...
Read updateWe have added Work in bench and boot mode on Delphi DCM6.2AP, Denso PX43 and Denso Gen III R7F701216 ECUs. to the list of current KESS3 updates we check when customers contact Llan...
Read updateThe latest KESS3 technical release from Alientech gives workshops another route to consider for Read and write via OBD Transtron L4KX ECUs installed on the latest Isuzu D-Max and M...
Read updateWe have added Bosch MD1CC878 and Continental-Siemens HDEP MCM2.1 D4: work on Mercedes-Benz, Western Star, Class and Isuzu trucks with KESS3. to the list of current KESS3 updates we...
Read updateWorks at 360° on Bosch EDC16C39 control units installed on Isuzu D-Max in BENCH mode is more than another supplier changelog item. For Llandow Tuning at www.tuning.wales, it change...
Read updateWe have added Reprogram in Bench Mode Bosch MD1 equipped on the new Isuzu Giga! to the list of current KESS3 updates we check when customers contact Llandow Tuning. It is relevant...
Read update