AWD dyno
Load controlled
2WD dyno
Front or rear wheel drive
Printed graph
Free with each tune
Dyno sessions
Know exactly what the car makes
Use the dyno to measure a baseline, check the tune under controlled load and confirm the result with repeatable power and torque readings.
Stage 1 estimate
317-332hp
512-552Nm
Baseline run
We record the car as it arrives so the result is measured against its real starting point.
Controlled conditions
Runs are completed with controlled load and monitoring so the data is consistent.
Clear result
You can compare stock and tuned output, with a printed graph free with each tune.
On-road dyno options
Difficult to load? We can still measure it.
Bodywork, wheelbase, track width, ground clearance or driven-axle layout can make some vehicles difficult to load safely onto a chassis dyno. Newer MINI models, large vans and specialist 4x4 or 6x6 vehicles are common examples.
We can use on-road dyno systems, including Magicmotorsport DynoRoad equipment, to collect repeatable before-and-after readings under real driving load. That means even unusual vehicles can be measured and the result checked properly.