Current dyno offer

£150 off Stage 1, Stage 1+ and Stage 2

Register to save your vehicle, or browse to find your vehicle and see more information.

Register Find my vehicle

Your privacy choices

Choose how this site uses cookies

Choose cookies

Citroën DS4 DS4 2010

Citroën DS4 DS4 2010

2.0 BlueHDI (EAT6) (2015 - 2015) 180HP Diesel · Diesel · 180hp / 400Nm stock

Change car
Change Car

Exhaust Systems for your Citroën DS4

Explore exhaust systems from Milltek and other leading manufacturers. We are happy to fit a suitable system at Llandow Tuning, with advice on sound, fitment and any supporting work your car needs.

Selected vehicle Citroën DS4 DS4 2010 2.0 BlueHDI (EAT6) (2015 - 2015) 180HP Diesel

The sound and finish you want, properly fitted

An exhaust upgrade can change the character of your car, from its tone under acceleration to the appearance of its tailpipes. We can help you choose a system that suits your driving, your existing modifications and the level of sound you want inside the cabin.

We are happy to fit exhausts from Milltek Sport, Akrapovič, REMUS and other leading manufacturers at our Llandow workshop, near Cowbridge. If you already have a system in mind, send us the product details and we can check what is needed for fitting.

Explore leading exhaust brands

The systems below show examples from each manufacturer's range. We will confirm availability and the correct part number for your Citroën DS4 before arranging the work.

Milltek Sport resonated cat-back exhaust with polished GT90 tailpipes for a BMW M240i F22

Milltek Sport

Milltek offers stainless steel systems with resonated, non-resonated and valved options across its range. Different tailpipe finishes let you choose the appearance as well as the sound, depending on the application.

Pictured: a resonated 304L stainless steel cat-back for the BMW M240i F22 without OPF or xDrive, with polished GT90 tailpipes.

Akrapovič titanium Slip-On Line exhaust for the BMW M3 G80 and G81

Akrapovič

Akrapovič offers performance exhausts with a focus on materials, weight and sound. Its range includes titanium Slip-On systems for selected performance cars, with the required tailpipes and controls specified for each installation.

Pictured: the titanium Slip-On Line for the BMW M3 G80/G81. The specified carbon-fibre tailpipe set is ordered separately.

REMUS axle-back exhaust for BMW 320i and 420i F30, F31, F32 and F36 models

REMUS

REMUS offers axle-back, cat-back and GPF-back systems, including valve-controlled options for selected models. Tailpipe choices and the sections replaced vary with the car and the chosen kit.

Pictured: an axle-back system for selected BMW 320i/420i F30, F31, F32 and F36 models.

Product photographs from Milltek Sport, Akrapovič and REMUS. These illustrate their ranges and do not confirm fitment to the selected vehicle.

Choosing your exhaust

Cat-back or rear section
A cat-back replaces the system behind the catalytic converter; an axle-back focuses on the rear section. On cars with particulate filters, the exact starting point and retained equipment need checking against the kit specification.
Resonated or non-resonated
Resonators shape the exhaust note and help manage unwanted frequencies. Tell us whether you prefer a restrained tone or more volume, and how much motorway driving you do, so we can discuss cabin comfort as well as outside sound.
Valved systems
Exhaust valves change the route through the silencer to alter the sound. We check compatibility with the vehicle's controls and identify any actuators, wiring or controller required by the chosen system.
Tailpipes and clearance
Diameter, finish and outlet layout need to suit the bumper or diffuser. We check alignment, mounting points and clearance around the body, heat shields and nearby components.

An exhaust that suits your Citroën DS4

For a diesel, we check the DPF, catalysts, SCR/AdBlue equipment and exhaust sensors fitted to the vehicle. These affect which sections can be replaced and the sound you can expect. A rear exhaust change alone does not promise a particular power increase.

A system chosen for sound and appearance may offer different benefits from one selected to support a larger turbo or other engine work. We can discuss the complete setup and arrange custom tuning or dyno checks where appropriate.

Already chosen an exhaust? We are happy to fit it.

Send us the brand, part number or product link, along with your registration and details of any existing modifications. We can check compatibility, confirm any extra clamps, gaskets, adapters or trim needed, and quote for the installation.

Fitting includes checking joints for leaks, tailpipe alignment, clearance and valve operation where fitted. Contact Llandow Tuning for exhaust fitting near Cowbridge, Llantwit Major and Bridgend.

Ask about exhaust fitting for your Citroën DS4