Topic
333 editorial items filed under this topic.
Supplier announcement: Reprogramming support: in BOOT mode the Continental EMS2102 ECUs that equip Ford’s B-segment . Supplier: Alientech Tool: KESS3 Release date: 5 October 2022 C...
Read updateSupplier announcement: KESS3 remaps Mazda Skyactiv-G with Mitsubishi M13/M16 ECUs . Supplier: Alientech Tool: KESS3 Release date: 28 September 2022 Access named in the announcement...
Read updateSupplier announcement: Bosch TCU ZF6HP, Kefico TC60 and TC80, Temic MPS6: works in BENCH mode on the control units supported by KESS3 . Supplier: Alientech Tool: KESS3 Release date...
Read updateSupplier announcement: KESS3 bench support: BMW R1250 GS . Supplier: Alientech Tool: KESS3 Release date: 14 September 2022 Access named in the announcement: BENCH Source: Alientech...
Read updateSupplier announcement: Support via OBD on DELPHI ETC3 control units equipped on the trucks with PACCAR engines . Supplier: Alientech Tool: KESS3 Release date: 7 September 2022 Acce...
Read updateSupplier announcement: Remapping support: with KESS3 the small Honda Brio equipped with Bosch ME17.9.55 TC1724 control unit . Supplier: Alientech Tool: KESS3 Release date: 8 August...
Read updateSupplier announcement: KESS3 OBD support: Yamaha Ténéré 700 . Supplier: Alientech Tool: KESS3 Release date: 2 August 2022 Access named in the announcement: OBD; BOOT Source: Ali...
Read updateSupplier announcement: Works at 360° on Bosch EDC16C39 control units installed on Isuzu D-Max in BENCH mode . Supplier: Alientech Tool: KESS3 Release date: 26 July 2022 Control uni...
Read updateSupplier announcement: Remapping support: Mini Cooper S equipped with Bosch MEVD17.2.2 . Supplier: Alientech Tool: KESS3 Release date: 19 July 2022 Control units named in the annou...
Read updateSupplier announcement: Reprogramming in BOOT and BENCH mode Bosch MG7, MED17 and MEG17 ECUs, as well as Kefico KME1 equipped on a lot of Hyundai and KIA vehicles . Supplier: Alient...
Read updateSupplier announcement: Reprogramming support: in Bench Mode Bosch MD1 equipped on the Isuzu Giga . Supplier: Alientech Tool: KESS3 Release date: 5 July 2022 Control units named in...
Read updateSupplier announcement: Reprogramming support: Peugeot 2008 in BOOT Mode with KESS3 . Supplier: Alientech Tool: KESS3 Release date: 28 June 2022 Software release: 56.12 Access named...
Read update