Topic
333 editorial items filed under this topic.
Supplier announcement: Reprogramming support: Bobcat S76 with Bosch EDC17C87 control unit and JCB Backhoe Loaders with Delphi DCM3.3+ ECU . Supplier: Alientech Tool: KESS3 Release...
Read updateSupplier announcement: Support on BENCH mode with KESS3 on the supported ECUs from Bosch, Continental and Delphi equipped on Porsche, Audi, Seat, Skoda and Volkswagen brands . Supp...
Read updateSupplier announcement: Support on bench on open Continental SIM2K-2XX ECU/TCU and Bosch MEDG17.9.8 equipped on Hyundai and Kia models . Supplier: Alientech Tool: KESS3 Release date...
Read updateSupplier announcement: KESS3 OBD read/write support: Bosch MG1UA008 and MG1US008, DFSK Motor, Proton and Baic . Supplier: Alientech Tool: KESS3 Release date: 29 November 2023 Contr...
Read updateSupplier announcement: Remapping support: the Bosch MG1CS036 ECUs equipped on recent Ford SUVs and Pick-ups using the BENCH mode . Supplier: Alientech Tool: KESS3 Release date: 22...
Read updateSupplier announcement: Connect directly with the ECU connectors on Bosch MD1CS016 equipped in recent Renault engines . Supplier: Alientech Tool: KESS3 Release date: 15 November 202...
Read updateSupplier announcement: OBD read/write support: John Deere tractors with Phoenix L40 ECU . Supplier: Alientech Tool: KESS3 Release date: 8 November 2023 Access named in the announce...
Read updateSupplier announcement: Reprogramming support: in BENCH mode the Bosch EDC15C7 and Bosch EDC17C72 ECUs, Bosch ZF 6HP19 TCU and Bosch EDC16CP34 ECU . Supplier: Alientech Tool: KESS3...
Read updateSupplier announcement: Remapping support: the ECUs of Mitsubishi-equipped motorcycles from Kawasaki and Suzuki, from 125cc to 1400cc, in BENCH mode . Supplier: Alientech Tool: KESS...
Read updateSupplier announcement: KESS3 OBD support: JCB Delphi DCM7.24 . Supplier: Alientech Tool: KESS3 Release date: 18 October 2023 Control units named in the announcement: DCM7.24 Access...
Read updateSupplier announcement: OBD read/write support: Keihin and Continental ECUs installed on KTM and Husqvarna cross/enduro bikes . Supplier: Alientech Tool: KESS3 Release date: 11 Octo...
Read updateSupplier announcement: Support in bench and boot mode on Delphi DCM6.2AP, Denso PX43 and Denso Gen III R7F701216 ECUs . Supplier: Alientech Tool: KESS3 Release date: 4 October 2023...
Read update