Articles tagged tcu

This Alientech KESS3 news is relevant for anyone dealing with Reprogram Bobcat S76 with Bosch EDC17C87 control unit and JCB Backhoe Loaders with Delphi DCM3.3+ ECU.. It points to f...

We have added Work on BENCH mode with KESS3 on the latest supported ECUs from Bosch, Continental and Delphi equipped on Porsche, Audi, Seat, Skoda and Volkswagen brands. to the lis...

A new Alientech KESS3 update has put Work on bench on open Continental SIM2K-2XX ECU/TCU and Bosch MEDG17.9.8 equipped on Hyundai and Kia models. on our workshop radar. The practic...

The latest KESS3 technical release from Alientech gives workshops another route to consider for Read and write via OBD the Bosch MG1UA008 and Bosch MG1US008 control units equipped...

This Alientech KESS3 news is relevant for anyone dealing with Remap the Bosch MG1CS036 ECUs equipped on recent Ford SUVs and Pick-ups using the BENCH mode.. It points to fresh supp...

A new Alientech KESS3 update has put Connect directly with the ECU connectors on Bosch MD1CS016 equipped in recent Renault engines. on our workshop radar. The practical question fo...

This Alientech KESS3 news is relevant for anyone dealing with Read and write via OBD the latest generation John Deere tractors with Phoenix L40 ECU.. It points to fresh support aro...

The latest KESS3 technical release from Alientech gives workshops another route to consider for Reprogram in BENCH mode the Bosch EDC15C7 and Bosch EDC17C72 ECUs, Bosch ZF 6HP19 TC...

A new Alientech KESS3 update has put Remap the ECUs of Mitsubishi-equipped motorcycles from Kawasaki and Suzuki, from 125cc to 1400cc, in BENCH mode. on our workshop radar. The pra...

We have added Remap via OBD the Delphi DCM7.24 ECUs found on recent JCB work vehicles. to the list of current KESS3 updates we check when customers contact Llandow Tuning. It is re...

This Alientech KESS3 news is relevant for anyone dealing with Read and write in OBD the Keihin and Continental ECUs installed on KTM and Husqvarna cross/enduro bikes.. It points to...

We have added Work in bench and boot mode on Delphi DCM6.2AP, Denso PX43 and Denso Gen III R7F701216 ECUs. to the list of current KESS3 updates we check when customers contact Llan...