Stage 1 Remap
Standard
Stage 1 Remap
Improvement
BHP
515hp
535hp
+ 20hp
Torque
588Nm
610Nm
+ 22Nm
Stage 1 Pricing
Our Full Stage 1 Package Using our dyno tested and proven remap. No off the shelf junk but a highly developed map to maximise performance safely.
Just
£300
Was
£400
All Stage 1 tuning is considered safe for a standard vehicle which is in good condition.
- Fully Dyno Tested
- Dyno Developed Map
- Remap Developed by Llandow Tuning
- Dyno Printout for Calibration
- Safe for Standard/Stock Cars
- 2 Year Warranty
- Full Aftersales Support
- Road Legal and Safe
- Better MPG
- 20BHP More Power
- 22NM More Torque
- Great for Towing
- Faster 0 to 60 Time
- Better Throttle Response
All Stage1 and Stage1+ tuning is provided at a flat rate. This price shown includes VAT and is for the tune being installed on your vehicle. There are no hidden extras
In the unlikely event there is a problem with the tune you will have our full backup, we’ll provide a complete vehicle diagnostic for free, and any issue will be investigated. Typically, issues are normally limited to modified vehicles where different intercoolers, exhaust systems, higher mileage or where other mods are installed and require some minor adjustments on our part to the applied recalibration and will be resolved for free. Should an issue be found with the vehicle, a full report will be given.
In the unlikely event there is a problem with the tune you will have our full backup, we’ll provide a complete vehicle diagnostic for free, and any issue will be investigated. Typically, issues are normally limited to modified vehicles where different intercoolers, exhaust systems, higher mileage or where other mods are installed and require some minor adjustments on our part to the applied recalibration and will be resolved for free. Should an issue be found with the vehicle, a full report will be given.
Stage 2 Remap
Stage 2 is any tuning where parts have been replaced and will need calibrating in to the vehicle. Our Stage 2 package includes whatever tested is needed to to ensure the map is as safe as it can be.
This could include intercooler upgrades, inlet upgrades, mods to the HPFP system, larger MAP sensor etc.
Larger turbos, cam mods, larger injectors are considered by us to be Stage 3 and thus require our Stage 3 service.
Stage 2 Pricing
Our Full Stage 2 is custom to your vehicle based on our exsiting research. It will include any needed dyno time
Just
£450
Stage 2 Tuning includes dyno time. So there is no seperate dyno charge. The price is the base price, depending on the mods you've introduced there may be addtional charges.
Stage 2 assumes most of the car is stock with maybe an intercooler or exhaust upgrade. Standard turbos and fuel injectors. If you've changed the turbos or injectors then normally this would be classed as a stage 3 vehicle.
You will need to have a detailed log of any mods made for us to be prepared to help you, sometimes you might need a full stage 3 tuning session. If you don't have a log and just bought the car then we will need to do this first also an engine health check might be a good place to start
If we agree to a stage 2 tune but where modifications to sensors or acuators has occoured there will be an addtional charge. Such changes could include a different turbo, injectors, MAP sensor, MAF sensor etc. Typically a one off fee of £75 will apply. But we reserve the right to decine the stage 2 remap where we feel only a full stage 3 session will apply.
Stage 2 assumes most of the car is stock with maybe an intercooler or exhaust upgrade. Standard turbos and fuel injectors. If you've changed the turbos or injectors then normally this would be classed as a stage 3 vehicle.
You will need to have a detailed log of any mods made for us to be prepared to help you, sometimes you might need a full stage 3 tuning session. If you don't have a log and just bought the car then we will need to do this first also an engine health check might be a good place to start
If we agree to a stage 2 tune but where modifications to sensors or acuators has occoured there will be an addtional charge. Such changes could include a different turbo, injectors, MAP sensor, MAF sensor etc. Typically a one off fee of £75 will apply. But we reserve the right to decine the stage 2 remap where we feel only a full stage 3 session will apply.
Stage 3 Tuning
Stage 3 tuning is completly custom and starts at £475 per tuning session.
Tuning at Stage 3 levels means completly custom. As such a full tuning session is needed for all EFI vehicle where the cams have been changed, larger turbos fitted, injectors need rescaling, ECU has been changed to a stand alone etc.
All our maps/recalibrations are developed in-house by us and our partners. We can cater for almost any vehicle, even where it doesn't fit on our chassis dyno such as large trucks etc we have an oncar dyno that is just as accurate. A printout will be included from one of our dynos for the engine calibration installed.
Additional dyno time can be purchased (see dyno page under services) including before and after runs. To avoid disappointment ensure you ask about dyno runs at the time of booking as our dynos are generally fully booked
Additional dyno time can be purchased (see dyno page under services) including before and after runs. To avoid disappointment ensure you ask about dyno runs at the time of booking as our dynos are generally fully booked
Other Common Tuning Services
We provide a wide range of recalibration services for this vehicle which can be applied to the engine ECU.
These services are billable seperatly. A single fee of £75 is payable for any of the following addons (where they are supported by the car)
All of these options are only available where we are tuning an ecu or where we have already tuned the ECU. If we have never seen your car before at the very least a Stage 1 tune is needed
- NOX Off
- OPF Off
- Decat
- O2 Sensor Off
- EVAP Off
- Exhaust Flaps Off
- MAF Delete
- Swirl Flap Off
- Speed Limit Off
- Immo Delete
- Active Grill Delete
- Kickdown Delete
- READINESS Cal
- Seconday Air Pump / Anti Smog Delete
- Start Stop Delete
- BMW CVN Patch
- Hotstart Fix
- Switchable Maps
- Idle Speed Adjustment
- DTC/Fault Code Off
- Pop and Bang
- Launch Control
- Anti Lag
- Crackles and Overrun
- Hardcut Limiters
- REV Limit Adjustment
- BMW Performance Display Calibration
- VANOS/VVT Disabling
- SAI/Anti Smog Delete
FERRARI
575M Maranello
575M Maranello
Gearbox Remap for FERRARI 575M Maranello
We provide a complete DSG, DCT, Semi Automatic and Full Automatic Gearbox Remap service for FERRARI 575M Maranello vehicles.
If you have an automatic or Dual Clutch Transmission in your FERRARI 575M Maranello we'd like to hear from you with any questions you might have about gearbox remapping
We typically recalibrate gearboxes when the engine will be making more torque thanks to a remap or hardware upgrades. Without a remap quite often the gearbox will become damaged as a result of the extra torque. We can often improve gearbox changes times giving you a helping hand to bring down 0 to 60 times.
Gearbox Remapping
Dual Clutch, Semi Auto and Full Auto Gearbox Remapping
From
£250
Walnut Blasting for FERRARI 575M Maranello
Carbon Builds up quickly in modern Petrol vehicles. Llandow tuning provides a complete Walnut blasting service where we truly remove all the cabron from the inlet valves.
BMW Sourced equipment is used and enables us to walnut blast everything fom a VG Fold, to Audi RS4 not to mention the odd FERRARI 575M Maranello
Forget the chemical treatments, aka Forte, Tec4 or TerraClean. In our opinion we've tried these products and they simply didn't work as advertised
If your FERRARI is over 50,000 miles and is a diesel or direct petrol injection then consider a walnut blast before a remap to see even bigger gains and better fuel economy.
Walnut Blasting
Inlet Removal and Carbon Removal using our Walnut Port Blasting Equipment
Fron
£295
Brake Disc Skimming for FERRARI 575M Maranello
In an ideal world you'd change your brake discs every time you change your brake pads. Why? Becuase the mating service is flat on a new disc and it isn't on a used one. Making a disc flat with an on car brake lathe resolve this issue and means you get the most from your new pads without compromising on performance
We can remove rust, lips and brake judder.
If you want to make your disks better than new on your FERRARI 575M Maranello our brake skimming service might be for you. Your discs will be matched directly to the runout of your wheel hubs meaning they are truly flat, something even a new disc cannot deliver.
Our equipment is OEM approved by Porsche, Mercedes-Benz, Ferrari and BMW
Brake Disc Skimming
We chanrge for disc skimming based on us also changing the pads and the assocated labour on the same axle.
Small Disc (From)
£10 per side
Large Disc (From)
£20 per side
Aircon Regas for FERRARI 575M Maranello
