Siemens / Continental
Search this ECU branch and its documented variants. Open the hub.
56 matching pages
-
Siemens MSSECU hub
BMW M ECU index, with shared MSS52/MSS54/MSS54HP definition and validation guidance and separate ECU/software references.
-
Siemens MSS54HPECU hub
MSS54HP hardware, 64 KiB partial-file geometry, scoped hw2701 definitions and separate CSL software/conversion context.
-
MSS54 and MSS54HP definition matching
Match complete software IDs, controller branch, file orientation and confidence metadata to the MSS54/HP XDF collection.
Applies to: Siemens MSS54Siemens MSS54HP
-
Siemens MSS54ECU hub
MSS54 definition matching, 32 KiB partial-file context, a scoped hw2801 map reference and the MSS54HP branch.
-
MSS52 definition coverage
Match the incomplete MSS52 XDF to D409/D444, its 32 KiB region, source labels and alternative table views.
Applies to: Siemens MSS52
-
Siemens MSS52ECU hub
S62B50 MSS52 reference: D409/D444 software identities, definition coverage, fueling, ignition, VANOS and torque guides.
-
MSS54HP CSL software and hardware
CSL hw0401 definition context, source release/ZB records and hardware-specific conversion evidence under MSS54HP.
Applies to: Siemens MSS54HP
-
MSS54HP hw2701 calibration reference
MSS54HP 211323002701J469 map examples with HP-specific partial offsets, source dimensions and match information.
Applies to: Siemens MSS54HP
-
MSS54 partial files and checksums
The repository’s MSS54 512 KiB-to-32 KiB extraction convention, slave/master order and scoped checksum-helper documentation.
Applies to: Siemens MSS54
-
MSS54 hw2801 calibration reference
File-relative map examples for MSS54 211322002801J469, with dimensions, conversions and source match ratios.
Applies to: Siemens MSS54
-
MSS52 driver demand and torque
MSS52 alternate throttle-map conversions, pedal-request and torque entry points, and temperature-based idle targets.
Applies to: Siemens MSS52
-
MSS52 ignition and VANOS
D409/D444 ignition and cam-target definitions, their different axis quantities and the XDF’s alternative angle/overlap views.
Applies to: Siemens MSS52
-
MSS52 fueling and lambda
D409/D444 XDF fuel-factor maps, RPM/relative-filling axes, lambda-adaptation entry points and dimensional checks.
Applies to: Siemens MSS52
-
MSS calibration validation and change records
Shared MSS52/MSS54/MSS54HP workflow for original reads, dimensional checks, operating-state evidence and reviewable results.
Applies to: Siemens MSS52Siemens MSS54Siemens MSS54HP
-
MSS definition files and map interpretation
Shared MSS52/MSS54/MSS54HP guidance for software identity, map names, units, alternate views and definition confidence.
Applies to: Siemens MSS52Siemens MSS54Siemens MSS54HP
-
Simos 18 and Simos 19 torque and air model comparison
A source-based comparison of torque requests, air charge, boost and fast/slow responses in Simos 18 and Simos 19 EA888 examples.
-
Siemens MSECU hub
Shared MS calibration, injector and logging guidance, with separate MS41, MS42, MS43, MS45 and variant references.
-
Siemens MS45.1ECU hub
MS45.1 wideband and secondary-air sensor distinctions, separate full-load adaptation and 457LO02S definition coverage.
-
Siemens MS45.0ECU hub
MS45.0 narrowband lambda context and the explicitly scoped E83/E85 456BO02S definition reference.
-
Siemens MS45ECU hub
MS45 family file formats, calibration-range ambiguity, integrity layers and links to MS45.0/MS45.1-specific references.
-
Siemens MS43ECU hub
M54 MS43 hardware, flash layout, checksum layers, supported definition IDs and links to driver-demand and hardware references.
-
Siemens MS42ECU hub
M52TU MS42 hardware, 512 kB memory layout, software-definition coverage and family-specific configuration.
-
Siemens MS41.2ECU hub
MS41.2 US S52 context, software matching and a variant-specific evidence record.
-
Siemens MS41.1ECU hub
MS41.1 M52 OBDII context, software matching and a variant-specific evidence record.
-
Siemens MS41.0ECU hub
MS41.0 M52 context, software matching and a variant-specific evidence record.
-
Siemens MS41ECU hub
MS41 family identification, 256 kB memory reference, calibration guide and MS41.0/MS41.1/MS41.2 branches.
-
MS42 and MS43 load reference
Measured, injection, ignition and VANOS load signals, their map-axis implications and a diagnostic workflow for MS42/MS43.
Applies to: Siemens MS42Siemens MS43
-
MS45 intake model torque and DISA
MS45 intake-model, torque and DISA parameter relationships, with consistency checks for modified airflow.
Applies to: Siemens MS45Siemens MS45.0Siemens MS45.1
-
MS45 fuel mass and injector calibration
MS45 fuel-mass and injector-characteristic entry points, with unit-aware starting, adaptation and idle checks.
Applies to: Siemens MS45Siemens MS45.0Siemens MS45.1
-
MS43 MS430069 extended load
Scope and matching-file requirements for MS4X’s MS430069 extended-load package for E46 M54B30 EU4 LHD.
Applies to: Siemens MS43
-
MS43 hardware and learned variants
MS43 hardware-index, ignition-coil and ambient-pressure-sensor distinctions, with evidence to keep before resetting learned equipment.
Applies to: Siemens MS43
-
MS43 driver demand and torque
MS43 pedal-processing and air-actuator entry points, with a structured comparison of request, response and intervention.
Applies to: Siemens MS43
-
MS42 configuration and diagnostics
MS42 learned gearbox/A/C equipment, configuration context and a diagnostic record that preserves useful evidence.
Applies to: Siemens MS42
-
MS41 calibration map guide
MS41 injection-time, ignition and idle map entry points, with an operating-state and injector-validation workflow.
Applies to: Siemens MS41Siemens MS41.0Siemens MS41.1Siemens MS41.2
-
MS42 and MS43 fuel and camshaft control
Shared MS42/MS43 map relationships, cold/warm and VANOS state, fuel corrections and a structured validation record.
Applies to: Siemens MS42Siemens MS43
-
MS injector data and fueling checks
Shared injector-data, unit and validation principles, with separate MS41/MS42/MS43 and MS45 calibration paths.
Applies to: Siemens MS41Siemens MS41.0Siemens MS41.1Siemens MS41.2Siemens MS42Siemens MS43Siemens MS45Siemens MS45.0Siemens MS45.1
-
MS41, MS42 and MS43 data logging
Match logger definitions to firmware and build useful baseline logs for MS41, MS42 and MS43.
Applies to: Siemens MS41Siemens MS41.0Siemens MS41.1Siemens MS41.2Siemens MS42Siemens MS43
-
MS calibration files and programming
Identify MS software, distinguish partial and full images, match definitions, and record a reproducible programming workflow.
Applies to: Siemens MS41Siemens MS41.0Siemens MS41.1Siemens MS41.2Siemens MS42Siemens MS43Siemens MS45Siemens MS45.0Siemens MS45.1
-
Simos 18 tool and file scope
Match Simos 18 tools and file formats to their explicitly documented variants.
Applies to: Simos 18.1Simos 18.10Simos 18.6
-
Simos 19ECU hub
Simos 19 petrol engine management: torque and air modelling, fuelling, ignition and variant-specific references.
-
Simos 18ECU hub
Simos 18 petrol engine management: torque modelling, air charge, fuel, ignition and variant-specific references.
-
Simos 19 support and logging evidence
Record variant-specific support statements and demonstrated logging coverage for Simos 19.
Applies to: Simos 19
-
Simos 19.6ECU hub
Simos 19.6 identification and documented coverage.
-
Simos 19.3ECU hub
Simos 19.3 identification and documented coverage.
-
Simos 18.10ECU hub
Simos 18.10 identification and product-specific support references.
-
Simos 18.7ECU hub
Simos 18.7 identification and product-specific support references.
-
Simos 18.6ECU hub
Simos 18.6 identification and product-specific support references.
-
Simos 18.4ECU hub
Simos 18.4 identification and product-specific support references.
-
Simos 18.2ECU hub
Simos 18.2 identification and product-specific support references.
-
Simos 18.1ECU hub
Simos 18.1 identification and product-specific support references.
-
SimosECU hub
Simos ECU series: start with the 18 and 19 family branches.
-
Siemens MSS70ECU hub
MSS70 definition index, initially documenting 9R20840S.
-
Siemens MSS65ECU hub
MSS65 source index and MSS6x flashing-tool context.
-
Siemens MSS60ECU hub
MSS60 source index and MSS6x flashing-tool context.
-
Siemens MSS50ECU hub
Introductory MSS50 index for documented hardware and BDM research.
-
Siemens / ContinentalECU hub
MS, MSS and Simos ECU references in one manufacturer group.