Page organisation in this revision
- Page type
- Technical article
- Subject
- Engines
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- Not recorded in this older revision
- Manufacturers
- Not recorded in this older revision
Changes from revision 1 to revision 3
Removed text is struck through; added text is highlighted.
BMW automotive engine families listed as P48. Specifications below retain the source's separate family and variant labels.
Family specifications
BMW P48 Turbo
FieldReported valueManufacturerBMW MotorsportProduction2019-2020ConfigurationInline-4 cylinderDisplacement2.0 litres (122 cubic inches )Cylinder bore86–90 mm (3.39–3.54 in )Piston strokeFree but typically 86–90 mm (3.39–3.54 in )Cylinder block materialAluminium alloyCylinder head materialAluminium alloyValvetrainDOHC 16-valveCompression ratio15:1TurbochargerGarret single- turbo , 3.5 bar (51 psi ) boost pressureFuel systemBosch HDEV6 350 bar (5,076 psi ) central high-pressure gasoline direct injectors, one per cylinderManagementBosch Motronic MS 7.4Fuel typeAral Ultimate 102 RON unleaded racing gasolineOil systemDry sump . Shell Helix UltraCooling systemSingle mechanical water pump feeding a single-sided cooling systemPower output610 + 30 hp (455 + 22 kW ) (2019) later 580 + 60 hp (433 + 45 kW ) (2020-present) including push-to-passTorque outputApprox. 650 N⋅m (479 lb⋅ft ) @ 9,000 rpmDry weight187 lb (85 kg ) including turbochargerPredecessorBMW P66 Series (V8)
BMW automotive engine directory
Design, development and variant notesThe P48 is a 2.0-litre turbocharged racing engine developed for Class 1 DTM regulations. The source describes it as a purpose-built race engine with some block design shared with the B48.It replaced BMW's naturally aspirated P66/1 DTM V8 and raced in the M4 Turbo DTM. Its race specifications should not be assumed to describe a B48 road engine.Data adapted from the cited Wikipedia revision by Wikipedia contributors under CC BY-SA 4.0. Production dates and fitments reflect that revision; verify the exact engine code, market and vehicle before applying a specification.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
Wikipedia: List of BMW engines. Wikipedia contributors; CC BY-SA 4.0. Source revision oldid 1382309748; accessed 2026-11-10.Wikipedia: BMW P48 Turbo engine. Wikipedia contributors; CC BY-SA 4.0. Source revision oldid 1347764562; accessed 2026-11-10.
Further Wikipedia-sourced detailsThe following additional information is drawn from the cited Wikipedia revision by Wikipedia contributors, available under CC BY-SA 4.0. An open-ended date reflects the source snapshot, not confirmed current production or fitment.Additional recorded applicationsSource version or ratingVehicle application as recordedApplicationsBMW M4 Turbo DTMApplicationsBMW X5 — Wikipedia flags this entry as needing a citation; applicability is unverifiedPage organisation changed
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: BMW P48 engines
BMW automotive engine families listed as P48. Specifications below retain the source's separate family and variant labels.
Family specifications
BMW P48 Turbo
| Field | Reported value |
|---|
| Manufacturer | BMW Motorsport |
| Production | 2019-2020 |
| Configuration | Inline-4 cylinder |
| Displacement | 2.0 litres (122 cubic inches ) |
| Cylinder bore | 86–90 mm (3.39–3.54 in ) |
| Piston stroke | Free but typically 86–90 mm (3.39–3.54 in ) |
| Cylinder block material | Aluminium alloy |
| Cylinder head material | Aluminium alloy |
| Valvetrain | DOHC 16-valve |
| Compression ratio | 15:1 |
| Turbocharger | Garret single- turbo , 3.5 bar (51 psi ) boost pressure |
| Fuel system | Bosch HDEV6 350 bar (5,076 psi ) central high-pressure gasoline direct injectors, one per cylinder |
| Management | Bosch Motronic MS 7.4 |
| Fuel type | Aral Ultimate 102 RON unleaded racing gasoline |
| Oil system | Dry sump . Shell Helix Ultra |
| Cooling system | Single mechanical water pump feeding a single-sided cooling system |
| Power output | 610 + 30 hp (455 + 22 kW ) (2019) later 580 + 60 hp (433 + 45 kW ) (2020-present) including push-to-pass |
| Torque output | Approx. 650 N⋅m (479 lb⋅ft ) @ 9,000 rpm |
| Dry weight | 187 lb (85 kg ) including turbocharger |
| Predecessor | BMW P66 Series (V8) |
BMW automotive engine directory
Data adapted from the cited Wikipedia revision by Wikipedia contributors under CC BY-SA 4.0. Production dates and fitments reflect that revision; verify the exact engine code, market and vehicle before applying a specification.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
Revision 3: BMW P48 engines
BMW automotive engine families listed as P48. Specifications below retain the source's separate family and variant labels.
Family specifications
BMW P48 Turbo
| Field | Reported value |
|---|
| Manufacturer | BMW Motorsport |
| Production | 2019-2020 |
| Configuration | Inline-4 cylinder |
| Displacement | 2.0 litres (122 cubic inches ) |
| Cylinder bore | 86–90 mm (3.39–3.54 in ) |
| Piston stroke | Free but typically 86–90 mm (3.39–3.54 in ) |
| Cylinder block material | Aluminium alloy |
| Cylinder head material | Aluminium alloy |
| Valvetrain | DOHC 16-valve |
| Compression ratio | 15:1 |
| Turbocharger | Garret single- turbo , 3.5 bar (51 psi ) boost pressure |
| Fuel system | Bosch HDEV6 350 bar (5,076 psi ) central high-pressure gasoline direct injectors, one per cylinder |
| Management | Bosch Motronic MS 7.4 |
| Fuel type | Aral Ultimate 102 RON unleaded racing gasoline |
| Oil system | Dry sump . Shell Helix Ultra |
| Cooling system | Single mechanical water pump feeding a single-sided cooling system |
| Power output | 610 + 30 hp (455 + 22 kW ) (2019) later 580 + 60 hp (433 + 45 kW ) (2020-present) including push-to-pass |
| Torque output | Approx. 650 N⋅m (479 lb⋅ft ) @ 9,000 rpm |
| Dry weight | 187 lb (85 kg ) including turbocharger |
| Predecessor | BMW P66 Series (V8) |
BMW automotive engine directory
Design, development and variant notes
The P48 is a 2.0-litre turbocharged racing engine developed for Class 1 DTM regulations. The source describes it as a purpose-built race engine with some block design shared with the B48.
It replaced BMW's naturally aspirated P66/1 DTM V8 and raced in the M4 Turbo DTM. Its race specifications should not be assumed to describe a B48 road engine.
Data adapted from the cited Wikipedia revision by Wikipedia contributors under CC BY-SA 4.0. Production dates and fitments reflect that revision; verify the exact engine code, market and vehicle before applying a specification.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
Further Wikipedia-sourced details
The following additional information is drawn from the cited Wikipedia revision by Wikipedia contributors, available under CC BY-SA 4.0. An open-ended date reflects the source snapshot, not confirmed current production or fitment.
Additional recorded applications
| Source version or rating | Vehicle application as recorded |
|---|
| Applications | BMW M4 Turbo DTM |
| Applications | BMW X5 — Wikipedia flags this entry as needing a citation; applicability is unverified |