Catalogue identity
The TuningService.uk ECU catalogue records EDC16U under Bosch EDC16 (catalogue record 1599, observed 10 November 2026). The catalogue name is an identification lead; it does not by itself prove vehicle fitment or software compatibility.
This broad catalogue label groups similarly named U entries for navigation; it is not proof that all share the same fuel system or software.
Application evidence
Alientech’s 2017 list uses the broad EDC16U label for selected Audi A3 8P examples, including 1.9 TDI BKC and 2.0 TDI BKD. The list does not specify a U1, U31 or U34 suffix for these rows; identify the actual controller before choosing a definition. Alientech, PDF pages 13–14.
Tuning and identification
For Volkswagen unit-injector EDC16 examples, SSP 304 describes fuel quantity calculation and start-of-injection control in relation to engine speed and calculated injection quantity. This is useful system context, but the broad EDC16U label does not identify the exact U1/U31/U34 variant, software, units or map addresses.
Unlike a common-rail application, these unit-injector examples do not have a shared high-pressure fuel rail to calibrate. Confirm the engine’s actual fuel system and ECU before selecting definitions or programming methods.
Read EDC16 torque fuel and tuning basics and EDC16 variant application and tuning differences for the shared context. Examples are not an exhaustive fitment list; check the installed ECU and current tool documentation.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
- TuningService.uk owner ECU catalogue. TuningService.uk master ECU catalogue; administrator access required. Active Bosch EDC16 labels observed on 10 November 2026; this is a dated observation, not a live feed. Source revision Catalogue records and identifiers as observed 2026-11-10; accessed 2026-11-10.
- Alientech supported-vehicle list, document created 24 March 2017; historical tool coverage; accessed 10 November 2026.
- Volkswagen Self-Study Programme 304: EDC16. R5/V10 unit-injector metering and start-of-injection control. Accessed 10 November 2026.