Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
ECU hub
Subject
ECUs
Parent
Bosch EDC16CP35
Applies to
No ECU-specific applicability
Tool groups
Not recorded in this older revision
Manufacturers
Not recorded in this older revision

Catalogue identity

The TuningService.uk ECU catalogue records EDC16CP35 M&S under Bosch EDC16 (catalogue record 1576, observed 10 November 2026). The catalogue name is an identification lead; it does not by itself prove vehicle fitment or software compatibility.

This entry is grouped with EDC16CP35 by its catalogue name for navigation. That placement does not establish hardware or calibration equivalence.

Application evidence

Microtronik lists the BMW 7 Series 745d automatic in its EDC16CP35 MS tool family. TRW lists separate master and slave DDE 6.3 controllers for the E65 745d M67/TU. The tool listing also groups other models under its heading, so use the installed part and software to establish the precise ECU and configuration.

Tuning and identification

On the documented 745d example, identify each DDE controller and retain its own original read; master and slave roles or software must not be assumed interchangeable. Microtronik lists bench and boot modes for its Hexprog II EDC16CP35 MS coverage; the available operation depends on the actual tool, version and ECU.

The published compatibility material does not establish a universal CP35 M&S torque-map layout or fixed offsets. Match definitions and checksum handling to each software version and consider gearbox torque coordination.

Read EDC16 torque fuel and tuning basics and EDC16 variant application and tuning differences for the shared context. Examples are not an exhaustive fitment list; check the installed ECU and current tool documentation.

Sources

Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.