Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
ECU hub
Subject
ECUs
Parent
Bosch EDC16CP34
Applies to
No ECU-specific applicability
Tool groups
Not recorded in this older revision
Manufacturers
Not recorded in this older revision

Catalogue identity

The TuningService.uk ECU catalogue records EDC16CP34 CRAFTER under Bosch EDC16 (catalogue record 1574, observed 10 November 2026). The catalogue name is an identification lead; it does not by itself prove vehicle fitment or software compatibility.

This entry is grouped with EDC16CP34 by its catalogue name for navigation. That placement does not establish hardware or calibration equivalence.

Application evidence

Alientech’s 2017 list identifies selected 2006 Volkswagen Crafter 2E 2.5 TDI examples with engine codes BJJ, BJK, BJL and BJM as EDC16CP34. The source calls the ECU EDC16CP34; it does not establish that the catalogue’s longer CRAFTER label denotes separate hardware or a distinct software family. Alientech supported-vehicle list, 2017, Volkswagen Crafter entries.

The same list identifies selected 2009 Crafter 2.5 TDI entries with engine codes CEBA, CEBB, CECA and CECB as EDC17CP20. Vehicle model or engine displacement alone therefore does not establish the fitted controller. Check the installed ECU’s part number, software and current tool coverage for the particular vehicle.

Tuning and identification

A distinct torque model, fuel-map layout or programming method has not been established for this exact label. Match the original read and definition to the actual ECU before making assumptions.

Read EDC16 torque fuel and tuning basics and EDC16 variant application and tuning differences for the shared context. Examples are not an exhaustive fitment list; check the installed ECU and current tool documentation.

Sources

Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.