Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
ECU hub
Subject
ECUs
Parent
Bosch EDC16
Applies to
No ECU-specific applicability
Tool groups
Not recorded in this older revision
Manufacturers
Not recorded in this older revision

Catalogue identity

The TuningService.uk ECU catalogue records EDC16CP42 under Bosch EDC16 (catalogue record 71, observed 10 November 2026). The catalogue name is an identification lead; it does not by itself prove vehicle fitment or software compatibility.

Application evidence

AutoTuner lists selected Renault, Nissan and Infiniti 3.0 diesel applications.

Tuning and identification

For specified Renault CP42 writes, AutoTuner describes injector-coding handling. It also lists CP42 for Renault-specific datalogging; available channels depend on the actual vehicle and tool.

Read EDC16 torque fuel and tuning basics and EDC16 variant application and tuning differences for the shared context. Examples are not an exhaustive fitment list; check the installed ECU and current tool documentation.

Additional source evidence

AutoTuner’s Renault-group logging announcement lists categories including air mass, boost, fuel pressure, injection, torque and temperatures. This is a group-wide list spanning many controllers; it does not promise that each channel is supported on a particular CP42. See EDC16 diagnostic data and configuration examples. AutoTuner Renault-group logging.

Further application examples

Alientech’s 2017 list includes Infiniti EX30d V9X and Nissan Navara 3.0 dCi V9X examples under EDC16CP42. The same list also has a separate Navara 3.0 entry under CP33, so the vehicle label alone is insufficient. Alientech, PDF pages 62 and 80.

Sources

Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.