Page organisation in this revision
- Page type
- Technical article
- Subject
- Reference
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- Not recorded in this older revision
- Manufacturers
- Not recorded in this older revision
Changes from revision 1 to revision 1
Removed text is struck through; added text is highlighted.
Parameter-name words
The MS4X keyword reference expands common words used in Siemens map and constant names. These words help read a name; the function and units still come from its specific definition.
KeywordMeaningCORCorrectionFACFactor or coefficientIGAIgnition angleMAFMass air flowNEngine speedPVPedal valueSTNDStandardisationTCOCoolant temperatureTIInjection time
Expanding a term
Retain the exact keyword and case, explain its use in a complete parameter name, and cite the family and software context. Use the original glossary for the wider vocabulary.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
MS4X Wiki: Siemens Keyword Translation. MS4X Wiki contributors. Source revision oldid 22822; accessed 2026-11-10.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Siemens terminology
Parameter-name words
The MS4X keyword reference expands common words used in Siemens map and constant names. These words help read a name; the function and units still come from its specific definition.
| Keyword | Meaning |
|---|
| COR | Correction |
| FAC | Factor or coefficient |
| IGA | Ignition angle |
| MAF | Mass air flow |
| N | Engine speed |
| PV | Pedal value |
| STND | Standardisation |
| TCO | Coolant temperature |
| TI | Injection time |
Expanding a term
Retain the exact keyword and case, explain its use in a complete parameter name, and cite the family and software context. Use the original glossary for the wider vocabulary.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
Revision 1: Siemens terminology
Parameter-name words
The MS4X keyword reference expands common words used in Siemens map and constant names. These words help read a name; the function and units still come from its specific definition.
| Keyword | Meaning |
|---|
| COR | Correction |
| FAC | Factor or coefficient |
| IGA | Ignition angle |
| MAF | Mass air flow |
| N | Engine speed |
| PV | Pedal value |
| STND | Standardisation |
| TCO | Coolant temperature |
| TI | Injection time |
Expanding a term
Retain the exact keyword and case, explain its use in a complete parameter name, and cite the family and software context. Use the original glossary for the wider vocabulary.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.