Removed text is struck through; added text is highlighted.
BMW diagnostics index
ICOM A2 is a later legacy ICOM A-family vehicle interface. It occupies the same place in the system as the earlier A: the communication device between a BMW diagnostic or programming application and the vehicle. BMW's ICOM Next guide explicitly lists ICOM A/A2 as legacy equipment.
An ICOM A2-type interface connected to a workshop computer. The unit's authenticity has not been independently verified. Still frame extracted at 1:20 from TEST BMW ICOM A2 by HOW TO USE ISTA BMW TUTORIAL; Creative Commons Attribution (CC BY), as stated on YouTube.
Use with adapters
BMW's Next hardware guide states that the legacy B, C, D and E adapters are functionally compatible with Next A, and that Next B, C and D can also be used with legacy A/A2. The B adapter covers the applicable MOST route; C connects to a supported round 20-pin vehicle socket. This adapter statement is not a promise that every software release supports every legacy main unit.
Checking a used interface
Record the hardware identification, connector condition, software version and firmware, and check support for the actual service operation. A2 is also a common marketplace name for replicas, so a seller's photograph or case label alone is insufficient evidence that an example is genuine. BMW's hardware compatibility table is a useful starting point; compare with ICOM A and ICOM Next.Record the hardware identification, connector condition, software version and firmware, and check support for the actual service operation. A2 is also a common marketplace name for replicas, so a seller's photograph or case label alone is insufficient evidence that an example is genuine. This seller's A2-labelled photograph illustrates an example offered as A2; its authenticity is unverified. BMW's hardware compatibility table is a useful starting point; compare with ICOM A1 and ICOM Next.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
BMW ICOM Next hardware family user guide. ACTIA I+ME hardware family user guide, independent mirror; components, connections and legacy adapter compatibility. Source revision Guide version 1.00, 2015, especially printed pages 8–9 and 26; accessed 2026-11-10.BMW Group Techinfo website and AOS user guide. BMW of North America; AOS, ISTA, ICOM, pass-through, connectors and programming preparation; regional requirements may vary. Source revision BMW Techinfo system requirements and user guide, 2022; accessed 2026-11-10.
Page organisation changed
Field
Revision 1
Revision 6
Page type
Technical article
Technical article
Subject
Diagnostics
Diagnostics
Parent
Section level
Section level
Applies to
No ECU-specific applicability
No ECU-specific applicability
Tool groups
Not recorded in this older revision
Diagnostic tools
Vehicle makes
Not recorded in this older revision
BMW
Rendered revisions
Open each version to inspect formatting, tables and photographs.
ICOM A2 is a later legacy ICOM A-family vehicle interface. It occupies the same place in the system as the earlier A: the communication device between a BMW diagnostic or programming application and the vehicle. BMW's ICOM Next guide explicitly lists ICOM A/A2 as legacy equipment.
Use with adapters
BMW's Next hardware guide states that the legacy B, C, D and E adapters are functionally compatible with Next A, and that Next B, C and D can also be used with legacy A/A2. The B adapter covers the applicable MOST route; C connects to a supported round 20-pin vehicle socket. This adapter statement is not a promise that every software release supports every legacy main unit.
Checking a used interface
Record the hardware identification, connector condition, software version and firmware, and check support for the actual service operation. A2 is also a common marketplace name for replicas, so a seller's photograph or case label alone is insufficient evidence that an example is genuine. This seller's A2-labelled photograph illustrates an example offered as A2; its authenticity is unverified. BMW's hardware compatibility table is a useful starting point; compare with ICOM A1 and ICOM Next.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
ICOM A2 is a later legacy ICOM A-family vehicle interface. It occupies the same place in the system as the earlier A: the communication device between a BMW diagnostic or programming application and the vehicle. BMW's ICOM Next guide explicitly lists ICOM A/A2 as legacy equipment.
BMW's Next hardware guide states that the legacy B, C, D and E adapters are functionally compatible with Next A, and that Next B, C and D can also be used with legacy A/A2. The B adapter covers the applicable MOST route; C connects to a supported round 20-pin vehicle socket. This adapter statement is not a promise that every software release supports every legacy main unit.
Checking a used interface
Record the hardware identification, connector condition, software version and firmware, and check support for the actual service operation. A2 is also a common marketplace name for replicas, so a seller's photograph or case label alone is insufficient evidence that an example is genuine. BMW's hardware compatibility table is a useful starting point; compare with ICOM A and ICOM Next.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
