Page organisation in this revision
- Page type
- Technical article
- Subject
- Flash & Device Programmers
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 1 to revision 2
Removed text is struck through; added text is highlighted.
Elnec lists BeeProg3, BeeProg4, BeeProg4C and BeeProg2AP universal programmers, plus BeeHive304, BeeHive404, BeeHive204AP and AutoBee-D1 production equipment. Each has an individual page in this section.
Elnec lists BeeProg2, BeeProg2C, BeeHive208S, BeeHive204, BeeHive204AP-AU, SmartProg2 and MEMprog2 as discontinued but still supported. Older discontinued equipment includes BeeProg and BeeHive4. Check Elnec’s current support and discontinuation pages for each model.
Software and manuals; discontinued products; Dataman model cross-reference.
Confirm the exact chip or module, supported operation, software version, required adapters and connection instructions before use.
Source: Elnec products.
Individual legacy model pagesElnec BeeHive204Elnec BeeHive208SElnec BeeProg2CElnec BeeProg2Elnec SmartProg2Elnec BeeHive204AP-AUElnec MEMprog2Elnec BeeProg Plus (BeeProg+)Elnec T51prog2Elnec PIKprog2Elnec SEEprogElnec MEMprogLElnec BeeHive4 Plus (BeeHive4+)Elnec BeeHive8SElnec MEMprogElnec BeeHive4Elnec BeeProgElnec JetProgElnec SmartProgElnec PIKprog Plus (PIKprog+)Elnec T51progElnec LabProg Plus (LabProg+)Elnec PREPROM-02aLVElnec 51&AVRprogElnec PIKprogElnec LabProg-48LVElnec PREPROM-03Elnec PREPROM-02Elnec SIM2051Elnec PREPROM-01Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Elnec device programmers
Elnec lists BeeProg3, BeeProg4, BeeProg4C and BeeProg2AP universal programmers, plus BeeHive304, BeeHive404, BeeHive204AP and AutoBee-D1 production equipment. Each has an individual page in this section.
Elnec lists BeeProg2, BeeProg2C, BeeHive208S, BeeHive204, BeeHive204AP-AU, SmartProg2 and MEMprog2 as discontinued but still supported. Older discontinued equipment includes BeeProg and BeeHive4. Check Elnec’s current support and discontinuation pages for each model.
Software and manuals; discontinued products; Dataman model cross-reference.
Confirm the exact chip or module, supported operation, software version, required adapters and connection instructions before use.
Source: Elnec products.
Revision 2: Elnec device programmers
Elnec lists BeeProg3, BeeProg4, BeeProg4C and BeeProg2AP universal programmers, plus BeeHive304, BeeHive404, BeeHive204AP and AutoBee-D1 production equipment. Each has an individual page in this section.
Elnec lists BeeProg2, BeeProg2C, BeeHive208S, BeeHive204, BeeHive204AP-AU, SmartProg2 and MEMprog2 as discontinued but still supported. Older discontinued equipment includes BeeProg and BeeHive4. Check Elnec’s current support and discontinuation pages for each model.
Software and manuals; discontinued products; Dataman model cross-reference.
Confirm the exact chip or module, supported operation, software version, required adapters and connection instructions before use.
Source: Elnec products.
Individual legacy model pages