Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Flash & Device Programmers
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 1 to revision 1

Removed text is struck through; added text is highlighted.

Elnec BeeHive404 is a concurrent production programmer with ISP capability. Elnec describes four independent programming modules based on BeeProg4.

Choosing a device and adapter

Confirm the exact IC part number, package and operation in the manufacturer’s current device list and software. A compatible adapter or programming module may be required. In-system programming depends on the device and target circuit; a listed programmer does not imply coverage of a complete ECU.

Sources: Elnec products; production programmers; software and device lists; Dataman partner cross-reference.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Elnec BeeHive404

Elnec BeeHive404 is a concurrent production programmer with ISP capability. Elnec describes four independent programming modules based on BeeProg4.

Choosing a device and adapter

Confirm the exact IC part number, package and operation in the manufacturer’s current device list and software. A compatible adapter or programming module may be required. In-system programming depends on the device and target circuit; a listed programmer does not imply coverage of a complete ECU.

Sources: Elnec products; production programmers; software and device lists; Dataman partner cross-reference.

Revision 1: Elnec BeeHive404

Elnec BeeHive404 is a concurrent production programmer with ISP capability. Elnec describes four independent programming modules based on BeeProg4.

Choosing a device and adapter

Confirm the exact IC part number, package and operation in the manufacturer’s current device list and software. A compatible adapter or programming module may be required. In-system programming depends on the device and target circuit; a listed programmer does not imply coverage of a complete ECU.

Sources: Elnec products; production programmers; software and device lists; Dataman partner cross-reference.