Tuning Wiki
WikiBosch Motronic M3.8.1History

Bosch Motronic M3.8.1

Revision 1

by llandowtuninguk@gmail.com
Add M3.8.1 with explicitly scoped processor evidence.

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
ECU hub
Subject
ECUs
Parent
Bosch Motronic M3.8
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Identification

Snap-on's software application guide includes an M2.9/3.8.1 label. The specific processor for a particular M3.8.1 board is not confirmed by that listing. Its placement here is a research candidate, not evidence that all M3.8.1 ECUs use an 8xC196.

Identification and scope

Record the Bosch and vehicle-manufacturer ECU numbers, engine and vehicle details, software ID and board or processor markings before using technical information. This page does not establish pin functions or interchangeability between variants.