Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engines
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
Not recorded in this older revision
Manufacturers
Not recorded in this older revision

Engine-group and variant data from Wikipedia's discontinued petrol list. These are Volkswagen Group records, including other Group marques; a listed application is not automatically a Volkswagen fitment.

View this section in the cited Wikipedia revision.

5.0 V10 40v (Lamborghini)

Source fieldEngine data
engine displacement & engine configuration4,961 cc (302.7 cu in) 90° V10 engine ; bore × stroke: 82.5 mm × 92.8 mm (3.25 in × 3.65 in), stroke ratio: 0.89:1 – under-square/long-stroke, 496.1 cc per cylinder; compression ratio: 11.5:1; dry sump lubrication system
cylinder block & crankcasecast aluminium alloy; die-forged steel crankshaft
cylinder heads & valvetraincast aluminium alloy; 40 valves
aspirationmagnesium alloy
DIN-rated motive power & torque outputs368 kW (500 PS; 493 bhp) at 7,800 rpm; 510 N⋅m (376 lbf⋅ft) at 4,500 rpm (80% available from 1,500 rpm) — 2003–2005
DIN-rated motive power & torque outputs382 kW (519 PS; 512 bhp) at 8,000 rpm; 510 N⋅m (376 lbf⋅ft) at 4,250 rpm — SE, Spyder, and 2006-on
DIN-rated motive power & torque outputs390 kW (530 PS; 523 bhp) at 8,000 rpm; 510 N⋅m (376 lbf⋅ft) at 4,250 rpm — Superleggera
applicationLamborghini Gallardo

5.0 V10 40v TFSI (Audi C6 RS6)

Source fieldEngine data
identificationparts code prefix/variant: 07L.B, ID code: BUH
engine displacement & engine configuration4,991 cc (304.6 cu in) 90° V10 engine ; bore × stroke: 84.5 mm × 89.0 mm (3.33 in × 3.50 in), stroke ratio: 0.95:1 – under-square/long-stroke, 499.1 cc per cylinder, compression ratio: 10.5:1; dry sump lubrication system, simplex roller chain and gear-driven external ancillaries including combined oil pump and centrifugal coolant pump , two oil coolers – oil:water and thermostatically controlled oil:air, water-cooled alternator
cylinder block & crankcasegrey cast iron; cast aluminium alloy
cylinder heads & valvetraincast aluminium alloy; 40 valves
aspirationmagnesium alloy; turbochargers; intercoolers
fuel systemFSI; direct injection
ignition system & engine managementBosch Motronic ME 9.1.2 electronic eng
DIN-rated motive power & torque outputBUH: 426 kW (579 PS; 571 bhp) at 6,250–6,700 rpm; 650 N⋅m (480 lbf⋅ft) at 1,500–6,250 rpm
applicationAudi C6 RS6 5.0 TFSI quattro (04/08–08/10)

5.2 V10 40v FSI (C6 S6/D3 S8)

Source fieldEngine data
identificationparts code prefix: 07L
engine displacement & engine configuration5,204 cc (317.6 cu in) 90° V10 engine ; bore × stroke: 84.5 mm × 92.8 mm (3.33 in × 3.65 in), stroke ratio: 0.91:1 – under-square/long-stroke, 520.4 cc per cylinder, compression ratio: 12.5:1
cylinder block & crankcasegrey cast iron; cast iron
cylinder heads & valvetraincast aluminium alloy; 40 valves
aspirationmagnesium alloy
fuel systemFSI; direct injection
ignition system & engine managementBosch Motronic MED 9.1 electronic engi
DIN-rated motive power & torque outputs, applications, ID codesAudi S6 — BXA : 320 kW (435 PS; 429 bhp) at 6,800 rpm ; 540 N⋅m (398 lbf⋅ft) at 3,000–4,000 rpm, (over 500 N⋅m (369 lbf⋅ft) between 2,500 and 5,500 rpm)
DIN-rated motive power & torque outputs, applications, ID codesAudi S8 — BSM : 331 kW (450 PS; 444 bhp) at 7,000 rpm; 540 N⋅m (398 lbf⋅ft) at 3,500 rpm (90% available from 2,300 rpm), 21.7 m /s maximum piston speed, 13.04 bar (189.13 psi) maximum MEP
applicationsAudi C6 S6 (03/06–08/11), Audi D3 S8 (06/06–07/10)

Volkswagen Group engine directory

Data adapted from the cited Wikipedia revision by Wikipedia contributors under CC BY-SA 4.0. Production dates and fitments reflect that revision; verify the exact engine code, market and vehicle before applying a specification.

Sources

Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.