Catalogue identity
The TuningService.uk ECU catalogue records EDC16CP34 CRAFTER under Bosch EDC16 (catalogue record 1574, observed 10 November 2026). The catalogue name is an identification lead; it does not by itself prove vehicle fitment or software compatibility.
This entry is grouped with EDC16CP34 by its catalogue name for navigation. That placement does not establish hardware or calibration equivalence.
Application evidence
Alientech’s 2017 list identifies selected 2006 Volkswagen Crafter 2E 2.5 TDI examples with engine codes BJJ, BJK, BJL and BJM as EDC16CP34. The source calls the ECU EDC16CP34; it does not establish that the catalogue’s longer CRAFTER label denotes separate hardware or a distinct software family. Alientech supported-vehicle list, 2017, Volkswagen Crafter entries.
The same list identifies selected 2009 Crafter 2.5 TDI entries with engine codes CEBA, CEBB, CECA and CECB as EDC17CP20. Vehicle model or engine displacement alone therefore does not establish the fitted controller. Check the installed ECU’s part number, software and current tool coverage for the particular vehicle.
Magic Motorsport’s Flex vehicle list uses EDC16CP34-CRAFT for Volkswagen Crafter 2.5 R5 TDI examples including BJJ, BJK, BJL and BJM. Bosch Electronic Service separately lists EDC16CP34 part 0281014146, VW 074906032AR, for selected Crafter 2.5 TDI variants. Check the actual ECU and vehicle details.
Tuning and identification
Volkswagen’s SSP 371 identifies the Crafter 2.5 TDI as a common-rail engine, so its fuel-pressure control is a relevant consideration alongside injection quantity and timing. This differs from the mechanically pressurised unit-injector system in Volkswagen’s R5/V10 examples described in SSP 304; do not transfer a rail-pressure assumption to those engines.
Magic Motorsport’s dated Flex list specifies bench for its CRAFT entries. That is a tool/version-specific method, not proof that every programmer uses the same connection. CRAFT does not itself prove a unique map layout versus every other CP34.
Read EDC16 torque fuel and tuning basics and EDC16 variant application and tuning differences for the shared context. Examples are not an exhaustive fitment list; check the installed ECU and current tool documentation.
Identification photograph
This Volkswagen unit is marked Bosch 0 281 014 132 and VW 074 906 032 BA. Bosch Electronic Service identifies the part as EDC16CP34 for selected Crafter 2.5 TDI vehicles; this is one example rather than a complete fitment rule.
Bosch Electronic Service: EDC16CP34 0281014132.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
- TuningService.uk owner ECU catalogue. TuningService.uk master ECU catalogue; administrator access required. Active Bosch EDC16 labels observed on 10 November 2026; this is a dated observation, not a live feed. Source revision Catalogue records and identifiers as observed 2026-11-10; accessed 2026-11-10.
- Alientech supported-vehicle list, 2017; Volkswagen Crafter entries; historical tool-list examples, accessed 10 November 2026.
- Magic Motorsport: Flex vehicle list 4.8.0.0. PDF page 124, Crafter R5 codes and EDC16CP34-CRAFT. Accessed 10 November 2026.
- Bosch Electronic Service: EDC16CP34 0281014146. Bosch and VW part numbers and Crafter applications. Accessed 10 November 2026.
- Volkswagen Self-Study Programme 371: 2.5 TDI engines in the Crafter. French-language Volkswagen training document: common-rail system. Accessed 10 November 2026.
- Volkswagen Self-Study Programme 304: EDC16. R5 and V10 unit-injector system comparison. Accessed 10 November 2026.