Page organisation in this revision
- Page type
- Technical article
- Subject
- Engines
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- None
Changes from revision 3 to revision 3
Removed text is struck through; added text is highlighted.
Engine-group and variant data from Wikipedia's discontinued diesel list. These are Volkswagen Group records, including other Group marques; a listed application is not automatically a Volkswagen fitment.
View this section in the cited Wikipedia revision.
4.9/5.0 V10 TDI PD 230-258kW
Source fieldEngine dataidentificationparts code prefix: 07Zengine configuration & engine displacement90° V10 engine , Turbocharged Direct Injection (TDI) turbodiesel; 4,921 cc (300.3 cu in), bore x stroke: 81.0 mm × 95.5 mm (3.19 in × 3.76 in), stroke ratio : 0.85:1 – undersquare/long-stroke, 492.1 cc per cylinder, 88 mm (3.46 in) cylinder spacing, compression ratio : 18.0:1, water-cooled alternatorcylinder block & crankcasecast aluminium alloy; grey cast ironcylinder heads & valvetraincast aluminium alloy; 20 valvesaspirationturbochargers; intercoolersfuel system & engine managementPD; direct injection; Unit Injectors; Bosch EDC16 32-bit electronic engine c4.9 DIN-rated power & torque output, ID codes230 kW (313 PS; 308 bhp) at 3,750 rpm; 750 N⋅m (553 lbf⋅ft) at 2,000 rpm — AJS, BLE, BKW (North America)5.0 DIN-rated power & torque outputs, ID codes230 kW (313 PS; 308 bhp) at 3,750 rpm; 750 N⋅m (553 lbf⋅ft) at 2,000 rpm — AYH, BWF5.0 DIN-rated power & torque outputs, ID codes258 kW (351 PS; 346 bhp) at 3,500 rpm; 850 N⋅m (627 lbf⋅ft) at 2,000 rpm — CBWA: Touareg R504.9 applicationsVolkswagen Phaeton 4motion (AJS: 12/02-10/06), Volkswagen Touareg (BKW: 11/03-11/04, BLE: 11/04->)5.0 applicationVolkswagen Touareg (AYH: 11/02-11/06, BWF: 12/06-02/09), Touareg R50 (CBWA: 08/07->)
Volkswagen Group engine directory
Additional mechanical and system details
The source may discuss several variants in each section. These are reported components and systems, not a guarantee that every item applies to every code.
4.9/5.0 V10 TDI PD 230-258kW
Source fieldAdditional hardware and system detailscylinder block & crankcasegrey cast iron; aluminium alloy; forged-steel crankshaft; specified connecting rods: forged connecting rods; main bearings: sixcylinder heads & valvetrainaluminium alloy; valves per cylinder: two; total valves: 20; single overhead camshaftaspirationvariable-geometry turbocharger; twin turbochargers; turbocharged; intercooledfuel system & engine managementunit-injector injection; direct injection; solenoid control or injectors; pressure stated: 2,050 bar; management or injection designation: Bosch EDC16exhaust systemexhaust-gas recirculation
Data adapted from the cited Wikipedia revision by Wikipedia contributors under CC BY-SA 4.0. Production dates and fitments reflect that revision; verify the exact engine code, market and vehicle before applying a specification.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
Wikipedia: List of discontinued Volkswagen Group diesel engines. Wikipedia contributors; CC BY-SA 4.0. Source revision oldid 1383037953; accessed 2026-11-10.
Further Wikipedia-sourced details
The following additional information is drawn from the cited Wikipedia revision by Wikipedia contributors, available under CC BY-SA 4.0. An open-ended date reflects the source snapshot, not confirmed current production or fitment.
Additional component and system specifications
Each source section can include several variants. Components, pressures and emissions systems are reported for that section and do not automatically apply to every code; exceptions are noted where the source provides them.
4.9/5.0 V10 TDI PD 230-258kW
Source fieldAdditional detailscylinder block & crankcaseConnecting rods: cracked forged design; Connecting rods: forgedcylinder heads & valvetrainValve actuation: bucket tappets; Camshaft drive: gearsaspirationAir metering: hot-film or hot-wire mass-airflow sensor; Turbocharger: variable geometry is described; Turbochargers: two are described; Intercooler position: side-mounted; Named forced-induction supplier or model: Garrett GT1852Vfuel system & engine managementInjector actuation: solenoid; Injection: unit-injector system; Pressure as stated: 2,050 bar; Named system: Bosch EDC16exhaust systemEGR: coolant-cooled; After-treatment: oxidation catalyst; Emissions standard as stated: EU3dimensionslength: 544 mm
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 3: Volkswagen Group discontinued diesel engines — Ten-cylinder diesels
Engine-group and variant data from Wikipedia's discontinued diesel list. These are Volkswagen Group records, including other Group marques; a listed application is not automatically a Volkswagen fitment.
View this section in the cited Wikipedia revision.
4.9/5.0 V10 TDI PD 230-258kW
| Source field | Engine data |
|---|
| identification | parts code prefix: 07Z |
| engine configuration & engine displacement | 90° V10 engine , Turbocharged Direct Injection (TDI) turbodiesel; 4,921 cc (300.3 cu in), bore x stroke: 81.0 mm × 95.5 mm (3.19 in × 3.76 in), stroke ratio : 0.85:1 – undersquare/long-stroke, 492.1 cc per cylinder, 88 mm (3.46 in) cylinder spacing, compression ratio : 18.0:1, water-cooled alternator |
| cylinder block & crankcase | cast aluminium alloy; grey cast iron |
| cylinder heads & valvetrain | cast aluminium alloy; 20 valves |
| aspiration | turbochargers; intercoolers |
| fuel system & engine management | PD; direct injection; Unit Injectors; Bosch EDC16 32-bit electronic engine c |
| 4.9 DIN-rated power & torque output, ID codes | 230 kW (313 PS; 308 bhp) at 3,750 rpm; 750 N⋅m (553 lbf⋅ft) at 2,000 rpm — AJS, BLE, BKW (North America) |
| 5.0 DIN-rated power & torque outputs, ID codes | 230 kW (313 PS; 308 bhp) at 3,750 rpm; 750 N⋅m (553 lbf⋅ft) at 2,000 rpm — AYH, BWF |
| 5.0 DIN-rated power & torque outputs, ID codes | 258 kW (351 PS; 346 bhp) at 3,500 rpm; 850 N⋅m (627 lbf⋅ft) at 2,000 rpm — CBWA: Touareg R50 |
| 4.9 applications | Volkswagen Phaeton 4motion (AJS: 12/02-10/06), Volkswagen Touareg (BKW: 11/03-11/04, BLE: 11/04->) |
| 5.0 application | Volkswagen Touareg (AYH: 11/02-11/06, BWF: 12/06-02/09), Touareg R50 (CBWA: 08/07->) |
Volkswagen Group engine directory
Additional mechanical and system details
The source may discuss several variants in each section. These are reported components and systems, not a guarantee that every item applies to every code.
4.9/5.0 V10 TDI PD 230-258kW
| Source field | Additional hardware and system details |
|---|
| cylinder block & crankcase | grey cast iron; aluminium alloy; forged-steel crankshaft; specified connecting rods: forged connecting rods; main bearings: six |
| cylinder heads & valvetrain | aluminium alloy; valves per cylinder: two; total valves: 20; single overhead camshaft |
| aspiration | variable-geometry turbocharger; twin turbochargers; turbocharged; intercooled |
| fuel system & engine management | unit-injector injection; direct injection; solenoid control or injectors; pressure stated: 2,050 bar; management or injection designation: Bosch EDC16 |
| exhaust system | exhaust-gas recirculation |
Data adapted from the cited Wikipedia revision by Wikipedia contributors under CC BY-SA 4.0. Production dates and fitments reflect that revision; verify the exact engine code, market and vehicle before applying a specification.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
Further Wikipedia-sourced details
The following additional information is drawn from the cited Wikipedia revision by Wikipedia contributors, available under CC BY-SA 4.0. An open-ended date reflects the source snapshot, not confirmed current production or fitment.
Additional component and system specifications
Each source section can include several variants. Components, pressures and emissions systems are reported for that section and do not automatically apply to every code; exceptions are noted where the source provides them.
| Source field | Additional details |
|---|
| cylinder block & crankcase | Connecting rods: cracked forged design; Connecting rods: forged |
| cylinder heads & valvetrain | Valve actuation: bucket tappets; Camshaft drive: gears |
| aspiration | Air metering: hot-film or hot-wire mass-airflow sensor; Turbocharger: variable geometry is described; Turbochargers: two are described; Intercooler position: side-mounted; Named forced-induction supplier or model: Garrett GT1852V |
| fuel system & engine management | Injector actuation: solenoid; Injection: unit-injector system; Pressure as stated: 2,050 bar; Named system: Bosch EDC16 |
| exhaust system | EGR: coolant-cooled; After-treatment: oxidation catalyst; Emissions standard as stated: EU3 |
| dimensions | length: 544 mm |
Revision 3: Volkswagen Group discontinued diesel engines — Ten-cylinder diesels
Engine-group and variant data from Wikipedia's discontinued diesel list. These are Volkswagen Group records, including other Group marques; a listed application is not automatically a Volkswagen fitment.
View this section in the cited Wikipedia revision.
4.9/5.0 V10 TDI PD 230-258kW
| Source field | Engine data |
|---|
| identification | parts code prefix: 07Z |
| engine configuration & engine displacement | 90° V10 engine , Turbocharged Direct Injection (TDI) turbodiesel; 4,921 cc (300.3 cu in), bore x stroke: 81.0 mm × 95.5 mm (3.19 in × 3.76 in), stroke ratio : 0.85:1 – undersquare/long-stroke, 492.1 cc per cylinder, 88 mm (3.46 in) cylinder spacing, compression ratio : 18.0:1, water-cooled alternator |
| cylinder block & crankcase | cast aluminium alloy; grey cast iron |
| cylinder heads & valvetrain | cast aluminium alloy; 20 valves |
| aspiration | turbochargers; intercoolers |
| fuel system & engine management | PD; direct injection; Unit Injectors; Bosch EDC16 32-bit electronic engine c |
| 4.9 DIN-rated power & torque output, ID codes | 230 kW (313 PS; 308 bhp) at 3,750 rpm; 750 N⋅m (553 lbf⋅ft) at 2,000 rpm — AJS, BLE, BKW (North America) |
| 5.0 DIN-rated power & torque outputs, ID codes | 230 kW (313 PS; 308 bhp) at 3,750 rpm; 750 N⋅m (553 lbf⋅ft) at 2,000 rpm — AYH, BWF |
| 5.0 DIN-rated power & torque outputs, ID codes | 258 kW (351 PS; 346 bhp) at 3,500 rpm; 850 N⋅m (627 lbf⋅ft) at 2,000 rpm — CBWA: Touareg R50 |
| 4.9 applications | Volkswagen Phaeton 4motion (AJS: 12/02-10/06), Volkswagen Touareg (BKW: 11/03-11/04, BLE: 11/04->) |
| 5.0 application | Volkswagen Touareg (AYH: 11/02-11/06, BWF: 12/06-02/09), Touareg R50 (CBWA: 08/07->) |
Volkswagen Group engine directory
Additional mechanical and system details
The source may discuss several variants in each section. These are reported components and systems, not a guarantee that every item applies to every code.
4.9/5.0 V10 TDI PD 230-258kW
| Source field | Additional hardware and system details |
|---|
| cylinder block & crankcase | grey cast iron; aluminium alloy; forged-steel crankshaft; specified connecting rods: forged connecting rods; main bearings: six |
| cylinder heads & valvetrain | aluminium alloy; valves per cylinder: two; total valves: 20; single overhead camshaft |
| aspiration | variable-geometry turbocharger; twin turbochargers; turbocharged; intercooled |
| fuel system & engine management | unit-injector injection; direct injection; solenoid control or injectors; pressure stated: 2,050 bar; management or injection designation: Bosch EDC16 |
| exhaust system | exhaust-gas recirculation |
Data adapted from the cited Wikipedia revision by Wikipedia contributors under CC BY-SA 4.0. Production dates and fitments reflect that revision; verify the exact engine code, market and vehicle before applying a specification.
Sources
Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.
Further Wikipedia-sourced details
The following additional information is drawn from the cited Wikipedia revision by Wikipedia contributors, available under CC BY-SA 4.0. An open-ended date reflects the source snapshot, not confirmed current production or fitment.
Additional component and system specifications
Each source section can include several variants. Components, pressures and emissions systems are reported for that section and do not automatically apply to every code; exceptions are noted where the source provides them.
| Source field | Additional details |
|---|
| cylinder block & crankcase | Connecting rods: cracked forged design; Connecting rods: forged |
| cylinder heads & valvetrain | Valve actuation: bucket tappets; Camshaft drive: gears |
| aspiration | Air metering: hot-film or hot-wire mass-airflow sensor; Turbocharger: variable geometry is described; Turbochargers: two are described; Intercooler position: side-mounted; Named forced-induction supplier or model: Garrett GT1852V |
| fuel system & engine management | Injector actuation: solenoid; Injection: unit-injector system; Pressure as stated: 2,050 bar; Named system: Bosch EDC16 |
| exhaust system | EGR: coolant-cooled; After-treatment: oxidation catalyst; Emissions standard as stated: EU3 |
| dimensions | length: 544 mm |