Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engines
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 3 to revision 3

Removed text is struck through; added text is highlighted.

Engine-group and variant data from Wikipedia's diesel list. These are Volkswagen Group records, including other Group marques; a listed application is not automatically a Volkswagen fitment.

View this section in the cited Wikipedia revision.

5.9 V12 48V TDI CR DPF 368kW

Source fieldEngine dataidentificationparts code prefix: 05Aengine configuration & engine displacement60° V12 engine , Turbocharged Direct Injection (TDI) turbodiesel; 5,934 cc (362.1 cu in); bore x stroke: 83.0 mm × 91.4 mm (3.27 in × 3.60 in), stroke ratio : 0.91:1 – undersquare/long-stroke, 494.5 cc per cylinder; 90 mm (3.54 in) cylinder spacing; 17 mm (0.67 in) cylinder bank offset; compression ratio : 16.0:1; two oil coolers (one: water/oil, the other: air/oil); four coolant radiators ; water-cooled alternatorcylinder block & crankcasecast iron; cast aluminium alloycylinder heads & valvetraincast aluminium alloy; 48 valvesaspirationturbochargers; intercoolersfuel system & engine managementCR; common rail; direct injection; Bosch 2; Bosch EDC electronic engine control unDIN-rated power & torque output, ID code368 kW (500 PS; 493 bhp) at 4,000 rpm – 62.0 kW (84.3 PS; 83.1 bhp) per litre; 1,000 N⋅m (738 lbf⋅ft) at 1,750-3,000 rpm — CCGAapplicationAudi Q7 V12 TDI quattro (09/08->)

Volkswagen Group engine directory

Additional mechanical and system details

The source may discuss several variants in each section. These are reported components and systems, not a guarantee that every item applies to every code.

5.9 V12 48V TDI CR DPF 368kW

Source fieldAdditional hardware and system detailscylinder block & crankcasecast iron; aluminium alloy; specified connecting rods: forged connecting rods; main bearings: sevencylinder heads & valvetrainaluminium alloy; valves per cylinder: four; total valves: 48; double overhead camshaft; hydraulic valve-clearance adjustmentaspirationvariable-geometry turbocharger; turbocharged; intercooled; pressure stated: up to 2.6 barfuel system & engine managementcommon rail mentioned; direct injection; piezo injectors; pressure stated: 2,000 barexhaust systemdiesel particulate filter; oxygen sensing

Data adapted from the cited Wikipedia revision by Wikipedia contributors under CC BY-SA 4.0. Production dates and fitments reflect that revision; verify the exact engine code, market and vehicle before applying a specification.

Sources

Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.

Wikipedia: List of Volkswagen Group diesel engines. Wikipedia contributors; CC BY-SA 4.0. Source revision oldid 1384573038; accessed 2026-11-10.

Further Wikipedia-sourced details

The following additional information is drawn from the cited Wikipedia revision by Wikipedia contributors, available under CC BY-SA 4.0. An open-ended date reflects the source snapshot, not confirmed current production or fitment.

Additional component and system specifications

Each source section can include several variants. Components, pressures and emissions systems are reported for that section and do not automatically apply to every code; exceptions are noted where the source provides them.

5.9 V12 48V TDI CR DPF 368kW

Source fieldAdditional detailscylinder block & crankcaseConnecting rods: cracked forged design; Connecting rods: forgedcylinder heads & valvetrainValve actuation: roller-finger followers; Valve clearance: hydraulic compensationaspirationAir metering: hot-film or hot-wire mass-airflow sensor; Turbocharger: variable geometry is described; Turbochargers: two are described; Turbocharger: coolant-cooled; Intercooler position: side-mounted; Pressure as stated: up to 2.6 barfuel system & engine managementFuel system: high-pressure pump; Injector actuation: piezoelectric; Diesel injection: common rail; Pressure as stated: 2,000 bar; Emissions standard as stated: Euro5exhaust systemAfter-treatment: diesel particulate filter; Exhaust monitoring: oxygen sensorsdimensionslength: 684 mm

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: Volkswagen Group diesel engines — 5.9 litre: 12 cylinders

Engine-group and variant data from Wikipedia's diesel list. These are Volkswagen Group records, including other Group marques; a listed application is not automatically a Volkswagen fitment.

View this section in the cited Wikipedia revision.

5.9 V12 48V TDI CR DPF 368kW

Source fieldEngine data
identificationparts code prefix: 05A
engine configuration & engine displacement60° V12 engine , Turbocharged Direct Injection (TDI) turbodiesel; 5,934 cc (362.1 cu in); bore x stroke: 83.0 mm × 91.4 mm (3.27 in × 3.60 in), stroke ratio : 0.91:1 – undersquare/long-stroke, 494.5 cc per cylinder; 90 mm (3.54 in) cylinder spacing; 17 mm (0.67 in) cylinder bank offset; compression ratio : 16.0:1; two oil coolers (one: water/oil, the other: air/oil); four coolant radiators ; water-cooled alternator
cylinder block & crankcasecast iron; cast aluminium alloy
cylinder heads & valvetraincast aluminium alloy; 48 valves
aspirationturbochargers; intercoolers
fuel system & engine managementCR; common rail; direct injection; Bosch 2; Bosch EDC electronic engine control un
DIN-rated power & torque output, ID code368 kW (500 PS; 493 bhp) at 4,000 rpm – 62.0 kW (84.3 PS; 83.1 bhp) per litre; 1,000 N⋅m (738 lbf⋅ft) at 1,750-3,000 rpm — CCGA
applicationAudi Q7 V12 TDI quattro (09/08->)

Volkswagen Group engine directory

Additional mechanical and system details

The source may discuss several variants in each section. These are reported components and systems, not a guarantee that every item applies to every code.

5.9 V12 48V TDI CR DPF 368kW

Source fieldAdditional hardware and system details
cylinder block & crankcasecast iron; aluminium alloy; specified connecting rods: forged connecting rods; main bearings: seven
cylinder heads & valvetrainaluminium alloy; valves per cylinder: four; total valves: 48; double overhead camshaft; hydraulic valve-clearance adjustment
aspirationvariable-geometry turbocharger; turbocharged; intercooled; pressure stated: up to 2.6 bar
fuel system & engine managementcommon rail mentioned; direct injection; piezo injectors; pressure stated: 2,000 bar
exhaust systemdiesel particulate filter; oxygen sensing

Data adapted from the cited Wikipedia revision by Wikipedia contributors under CC BY-SA 4.0. Production dates and fitments reflect that revision; verify the exact engine code, market and vehicle before applying a specification.

Sources

Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.

Further Wikipedia-sourced details

The following additional information is drawn from the cited Wikipedia revision by Wikipedia contributors, available under CC BY-SA 4.0. An open-ended date reflects the source snapshot, not confirmed current production or fitment.

Additional component and system specifications

Each source section can include several variants. Components, pressures and emissions systems are reported for that section and do not automatically apply to every code; exceptions are noted where the source provides them.

5.9 V12 48V TDI CR DPF 368kW

Source fieldAdditional details
cylinder block & crankcaseConnecting rods: cracked forged design; Connecting rods: forged
cylinder heads & valvetrainValve actuation: roller-finger followers; Valve clearance: hydraulic compensation
aspirationAir metering: hot-film or hot-wire mass-airflow sensor; Turbocharger: variable geometry is described; Turbochargers: two are described; Turbocharger: coolant-cooled; Intercooler position: side-mounted; Pressure as stated: up to 2.6 bar
fuel system & engine managementFuel system: high-pressure pump; Injector actuation: piezoelectric; Diesel injection: common rail; Pressure as stated: 2,000 bar; Emissions standard as stated: Euro5
exhaust systemAfter-treatment: diesel particulate filter; Exhaust monitoring: oxygen sensors
dimensionslength: 684 mm
Revision 3: Volkswagen Group diesel engines — 5.9 litre: 12 cylinders

Engine-group and variant data from Wikipedia's diesel list. These are Volkswagen Group records, including other Group marques; a listed application is not automatically a Volkswagen fitment.

View this section in the cited Wikipedia revision.

5.9 V12 48V TDI CR DPF 368kW

Source fieldEngine data
identificationparts code prefix: 05A
engine configuration & engine displacement60° V12 engine , Turbocharged Direct Injection (TDI) turbodiesel; 5,934 cc (362.1 cu in); bore x stroke: 83.0 mm × 91.4 mm (3.27 in × 3.60 in), stroke ratio : 0.91:1 – undersquare/long-stroke, 494.5 cc per cylinder; 90 mm (3.54 in) cylinder spacing; 17 mm (0.67 in) cylinder bank offset; compression ratio : 16.0:1; two oil coolers (one: water/oil, the other: air/oil); four coolant radiators ; water-cooled alternator
cylinder block & crankcasecast iron; cast aluminium alloy
cylinder heads & valvetraincast aluminium alloy; 48 valves
aspirationturbochargers; intercoolers
fuel system & engine managementCR; common rail; direct injection; Bosch 2; Bosch EDC electronic engine control un
DIN-rated power & torque output, ID code368 kW (500 PS; 493 bhp) at 4,000 rpm – 62.0 kW (84.3 PS; 83.1 bhp) per litre; 1,000 N⋅m (738 lbf⋅ft) at 1,750-3,000 rpm — CCGA
applicationAudi Q7 V12 TDI quattro (09/08->)

Volkswagen Group engine directory

Additional mechanical and system details

The source may discuss several variants in each section. These are reported components and systems, not a guarantee that every item applies to every code.

5.9 V12 48V TDI CR DPF 368kW

Source fieldAdditional hardware and system details
cylinder block & crankcasecast iron; aluminium alloy; specified connecting rods: forged connecting rods; main bearings: seven
cylinder heads & valvetrainaluminium alloy; valves per cylinder: four; total valves: 48; double overhead camshaft; hydraulic valve-clearance adjustment
aspirationvariable-geometry turbocharger; turbocharged; intercooled; pressure stated: up to 2.6 bar
fuel system & engine managementcommon rail mentioned; direct injection; piezo injectors; pressure stated: 2,000 bar
exhaust systemdiesel particulate filter; oxygen sensing

Data adapted from the cited Wikipedia revision by Wikipedia contributors under CC BY-SA 4.0. Production dates and fitments reflect that revision; verify the exact engine code, market and vehicle before applying a specification.

Sources

Curated reference notes. Applicability follows the cited sources; hardware testing by this wiki is not implied.

Further Wikipedia-sourced details

The following additional information is drawn from the cited Wikipedia revision by Wikipedia contributors, available under CC BY-SA 4.0. An open-ended date reflects the source snapshot, not confirmed current production or fitment.

Additional component and system specifications

Each source section can include several variants. Components, pressures and emissions systems are reported for that section and do not automatically apply to every code; exceptions are noted where the source provides them.

5.9 V12 48V TDI CR DPF 368kW

Source fieldAdditional details
cylinder block & crankcaseConnecting rods: cracked forged design; Connecting rods: forged
cylinder heads & valvetrainValve actuation: roller-finger followers; Valve clearance: hydraulic compensation
aspirationAir metering: hot-film or hot-wire mass-airflow sensor; Turbocharger: variable geometry is described; Turbochargers: two are described; Turbocharger: coolant-cooled; Intercooler position: side-mounted; Pressure as stated: up to 2.6 bar
fuel system & engine managementFuel system: high-pressure pump; Injector actuation: piezoelectric; Diesel injection: common rail; Pressure as stated: 2,000 bar; Emissions standard as stated: Euro5
exhaust systemAfter-treatment: diesel particulate filter; Exhaust monitoring: oxygen sensors
dimensionslength: 684 mm